Table of Contents
Advertisement
BUCKLE OPERATION
To ensure the buckle remains operational the inside of the buckle
must be kept free of liquids, sand, dirt, fluff, food or similar
substances. If the buckle is not operating or does not click when
second tongue is inserted then the buckle needs to be washed or
replaced. Contact our Customer Service Department for assistance.
TO CLEAN HARNESS BUCKLE:
If sticky liquids such as baby formula, fruit juice, etc. get inside your
Harness Buckle, it may become sluggish. An indication of a sluggish
Harness Buckle is that you cannot hear a click when engaging the
Harness Tongues. To restore the Harness Buckle to good working
order it needs to be cleaned as follows:
A. From the underside of the restraint pull each crotch 3-bar slide
then turn 3-bar slide and push through each slot to remove the
Harness Buckle from the restraint.
B. Place the harness buckle under warm (max. 40 degrees celsius)
running water as shown. Let the water run through the mouth of
the buckle for five minutes.
C. Engage and disengage the harness tongues and buckles several
times until a strong audible click is heard.
D. If you still cannot hear a strong audible click after engaging the
second harness tongue, then repeat cleaning several times. If
the harness buckle cannot be returned to its original working
condition then contact Britax.
E. Refit the harness buckle to the restraint with the red button
facing out & feeding each 3-bar slide through appropriate slot.
If the harness buckle cannot be returned to its
original working condition then contact Britax
Customer Service for assistance.
CARE & MAINTENANCE
Cover
Click
Body
3- bar
slide
55
Advertisement
Table of Contents
