Table of Contents
Advertisement
FITTING SUMMARY
Pull to remove some slack - do
not over tighten when finally
adjusted with the baby
A single twist
is required in
rearward-facing
mode.
DO NOT USE RESTRAINT IN REARWARD FACING MODE
WITHOUT STABILISING BAR FULLY EXTENDED.
THE TOP TETHER STRAP MUST ALWAYS BE FITTED WHEN
THE CHILD RESTRAINT IS USED IN A VEHICLE. ALWAYS
ATTACH THE HOOK AND REMOVE THE SLACK.
Top tether strap slack
HOW TO INSTALL
BABY USE REARWARD FACING
Hook Attachment Clip to
the car's anchor fitting.
Pull sash portion of
seatbelt to remove
slack.
Feed seatbelt between restraint
cover and restraint body (see
pages 21-23).
25
Advertisement
Table of Contents
