Table of Contents
Advertisement
PLACING CHILD INTO RESTRAINT
A. Check that the harness shoulder straps are in the
correct position. Refer to page 65 for correct shoulder
harness strap height and for setting up the harness.
B. Lengthen harness by pressing harness adjuster
button or lever. Pull out the desired amount of slack.
Press the harness buckle button to release tongues.
Store the tongues in the buckle tongue holders while
placing child in the restraint.
C. Place child in the restraint and feed each arm through
shoulder straps. Place harness buckle between child's
legs.
D. Fit either harness tongue into the harness buckle followed by the other tongue. A click is heard when the
last tongue is fully engaged.
Should the second tongue not engage - press the red button and reinsert the tongues. Ensure secure
engagement by pulling harness straps. If the harness buckle does not engage correctly then it may require
cleaning or seek replacement - refer to page 55. The buckle tongues are fully engaged when both
tongues are inserted and 'click' is heard.
Tongue
Buckle
TODDLER USE FORWARD FACING
Pull Straps
Buckle tongue holder
on both sides of the
seat. Push tongue
inwards to engage.
Click
HOW TO USE
Press Harness adjuster
button or lever
Pull to remove slack from
harness lap straps
47
Advertisement
Table of Contents
