Table of Contents
Advertisement
When Booster is not being used, secure in position, by engaging seatbelt over the booster seat
or store in a safe place.
TO REMOVE CHILD FROM HARNESS
AND SEAT
I. Disengage seat belt tongue from buckle, remove the
lap belt from the SecureGuard™ Device and remove
from the Child Harness strap loops.
J. Alternatively lift the child harness strap over the child's
head.
K. Remove child harness from child.
NOTE: It may be easier to unthread the vehicle
seatbelt out of the loops before lifting the child
harness over the child's head.
NOTE: Do not use this child restraint when the
child's shoulders reach the Upper Shoulder Height
Marker with the headrest in the top position.
TO REMOVE RESTRAINT FROM VEHICLE
A. If a Child Harness is used, feed seatbelt out through
Child Harness.
B. Disconnect the attachment clip from the car whilst lifting
the seat slightly to slacken the upper anchorage strap.
This leaves the Child Harness fitted to the booster seat
and allows the seat to be put back with no adjustment to
the Child Harness if it is in the same vehicle).
IMPORTANT :
The Gated Slide must be removed from the seatbelt if the booster seat and Child Harness
are no longer used in the car to allow other users to use the seatbelt as a lap-sash seatbelt.
HOW TO REMOVE
Lift child harness strap
over child's head.
Attachment Clip
Instructions for Installation & Use
Anchor Fitting
37
Advertisement
Table of Contents
