Table of Contents
Advertisement
ADJUSTING SHOULDER HARNESS STRAPS HEIGHT
Correct fitment of the harness is very important as it restrains the child in the restraint. The headrest must be
in the correct position and the harness must fit firmly around upper torso of the child and be positioned so as
to leave the child's arms and legs free.
For children in rear facing mode shoulder straps must be in slots nearest to the child's shoulders, but not lower
than the child's shoulders. Always adjust the harness slot position as the child grows. If your child has reached
the upper shoulder height marker then the restraint must be converted to Forward Facing mode (refer to
Forward Facing section starting on page 37).
REARWARD FACING
The shoulder straps must be in the
slots which are nearest to the child's
shoulders, but not lower than the
child's shoulders.
IMPORTANT :
Always adjust the height of the shoulder straps as child grows.
HOW TO SET-UP
Straps ALWAYS
over bar
Strap Connector
Shoulder straps
must
be threaded through appropriate
shoulder strap slots then
restraint.
BABY USE REARWARD FACING
Straps NEVER
under bar
Strap Connector
over the top
of bar at rear of
29
Advertisement
Table of Contents
