Table of Contents
Advertisement
HOW TO REMOVE
REMOVE RESTRAINT FROM VEHICLE
DISCONNECT TOP TETHER AND SEATBELT
A. Disengage the vehicle seatbelt buckle and lock-off
devices. Remove vehicle seatbelt from the restraint belt
paths.
B. Remove the top tether strap from storage pocket. Fully
press top tether adjuster button (A) while pulling top
tether strap (B) to lengthen as shown. In some vehicles
loosening of the top tether strap may be difficult. If so,
try pushing the restraint against the vehicle seat back or
slightly lifting the restraint to release the tension.
C. Disengage the attachment clip from upper anchorage
fitting. The child restraint is now disconnected.
Store loose strap in the storage pocket provided on the
cover.
D. To store the stabilising bar, lift the front flap at the end of
the seat, this uncovers the stabilising bar storage recess.
E. Press the button on left side (facing seat), to unlock
stabilising bar. Gently rotate and push down into the
recessed area.
F. Re-attach the front flap at the end of the seat.
G. Place seat in the fully upright position for easier storage and handling or if changing to forward facing mode.
50
Instructions for Installation & Use
1. Button under trim
E
Pull
B
A
Press and lengthen
Stabilising
bar
2. Rotate backwards
B
Front
flap
3. Then
push
inwards
E
Advertisement
Table of Contents
