Table of Contents
Advertisement
ONLY USE A 5/16 UNC GRADE 5 BOLT. IF THE BOLT IS NOT THE
CORRECT LENGTH THE CAR MANUFACTURER'S HAND BOOK CAN
PROVIDE ADVICE ON THE CORRECT LENGTH BOLT.
CHILD RESTRAINTS MUST NOT BE ATTACHED TO UNSOUND METAL OR
TO WOOD, OR SYNTHETIC STRUCTURES. WHEN DRILLING 9 MM HOLE
DO NOT DRILL THROUGH FUEL LINES, FUEL TANKS, ELECTRICAL WIRING,
OR RADIO SPEAKERS.
WEBBING STRAPS MUST BE PROTECTED FROM SHARP CORNERS AND
EDGES. THE ANCHOR FITTING MUST BE USED ONLY AS DESCRIBED
ABOVE. IT MUST NOT BE HOOKED ONTO ANY OTHER OBJECT.
CAR INSTALLATION ACCESSORIES
(From retailers of Britax Safe-n-Sound products)
EXTRA ANCHOR KITS: Available for using the restraint in additional cars.
Re-order no: 0038 or 0289
EXTENSION STRAPS: May be required for cars without a fixed parcel shelf.
Re-order no: 0035 or 0291 (length 300mm) or
0036 or 0290 (length 600mm)
INSTALLATION OF CAR
ANCHOR FITTING
Front of Vehicle
Fig.3.
NOTE: Marking on
the top of a Grade 5
Bolt. Do not use any
bolt without these
marks.
200mm
min.
Centre line of
seating position
65
Advertisement
Table of Contents
