User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting
Using Job Accounting
This section explains procedures while setting job accounting.
Login
If job accounting is enabled, an account ID entry screen appears each time you use this machine.
1
Enter the account ID using the numeric keys > [Login]
NOTE
• If you entered a wrong character, select [C] (Clear) and enter the account ID again.
• If the entered account ID does not match the registered ID, a warning beep will sound and login will fail.
Enter the correct account ID.
• By selecting [Check Counter], you can refer to the number of pages printed and the number of pages
scanned.
If user login administration is enabled, the screen to enter the login user name and password appears
instead of the screen to enter the account ID. Enter a login user name and password to login. If the user has
already registered the account information, the account ID entry would be skipped.
➡
Adding a User (Local User List) (page 519)
2
Proceed to complete the rest of the steps.
Logout
1
When the operation is complete, select the [Logout]key. Return to the Enter Account
ID screen.
564