Download Print this page

Kyocera ECOSYS MA6000ifx Setup Manual

Hide thumbs Also See for ECOSYS MA6000ifx:

Advertisement

Quick Links

Installation Environment
Kyocera Recommends selecting the Location for the machine as follows:
1. Room Temperature range: 50 to 90.5°F
2. Humidity Level: 10 to 80%
3. Power:
120 V Specification Model:
A dedicated 120VAC 60Hz 15A outlet
230 V Specification Model:
A dedicated 200-240VAC 50/60Hz 15A outlet
Avoid the following locations when selecting a site for the machine.
Adverse environmental conditions may affect the image quality.
+ Avoid locations near a window or with exposure to direct sunlight.
+ Avoid locations with vibrations.
+ Avoid locations with rapid temperature fluctuations.
+ Avoid locations with direct exposure to hot or cold air.
+ Avoid poorly ventilated locations.
Step 1 Setting up the Machine
1
Open the Box. Remove the machine carefully from the box
grasping both sides.
2
Lift the main unit from the handles by cardboard handles.
(for inch
(On some
models)
models)
3
Open the top cover. After Removing the packing material,
shake and install the toner container. Close the top cover.
1
Step 2 Install Waste toner box
2
1
Step 3 Loading Paper
1
Pull the Cassette 1 completely out
of the machine.
5
4
Load paper.
ECOSYS MA6000ifx/ECOSYS MA5500ifx
ECOSYS MA4500ifx/ECOSYS MA4500ix
2
3
2
Adjust the paper length and width guide to the
paper size required.
1
2
2
Gently push the Cassette 1 back in.
Recommended Installation Space
300 mm
(11.81")
*1: The value when an optional rear tray (PT-320) is installed to the ECOSYS MA6000ifx and
ECOSYS MA5500ifx.
3
5
8
4
3
2
1
2
1
+ Set print side face-down.
+ No bent or folder edges in the paper.
Such paper may cause paper jams.
+ Set the quantity of the paper less than
the maximum paper indication on the
side or the cassette.
+ If the paper is loaded without adj
usting the paper length guide and the pa
per width guides, skewed paper feeding,
and a paper jam will occur.
Setup Guide
400 mm
400 mm
(15.75")
(15.75")
100 mm
200 mm (7.87")
(3.94")
500 mm (19.69") *1
4
7
6
9
3
Fan the paper, then tap
it on a level surface.
500 mm (19.69")
2022.9 3VC0V5611001

Advertisement

loading

Summary of Contents for Kyocera ECOSYS MA6000ifx

  • Page 1 (3.94") 500 mm (19.69") *1 + Avoid locations with direct exposure to hot or cold air. *1: The value when an optional rear tray (PT-320) is installed to the ECOSYS MA6000ifx and + Avoid poorly ventilated locations. ECOSYS MA5500ifx. Step 1 Setting up the Machine Open the Box.
  • Page 2 [Status Page] > [Print] "Print Report/List"[Print Report/List] Step 7 Installing Software Access the following URL and select your model and OS. Download Center: https://kyocera.info/ For Windows For Mac Download and run the Web Installer and follow the Download and run the driver and follow the on-screen on-screen instructions to install the driver and software.

This manual is also suitable for:

Ecosys ma4500ifxEcosys ma5500ifx