Kyocera ECOSYS MA4000cifx Operation Manual page 495

System Menu > NetworkSettings
[IPP]
Item
[Protocol Settings]
[Available Network]
[IPP over TLS]
Item
[Protocol Settings]
[Available Network]
[HTTP]
Item
[Protocol Settings]
[Available Network]
[HTTPS]
Item
[Protocol Settings]
[Available Network]
Set whether to send documents using IPP. To use it, select On in these
settings, and select [Off] in [TLS] from "SecuritySettings". Then select
[Not Secure (IPPS & IPP)] in the security settings from Command Center
RX. The default port number is 631.
Value: Off, On, 1 to 32767 (Port Number)
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Sets whether to receive documents using TLS-protected IPP. To use it,
select On in these settings, and select [On] in [TLS] from
"SecuritySettings". The factory default port number is 443.
Value: Off, On, 1 to 32767 (Port Number)
NOTE
When the setting is On, TLS certificate is required. The factory certificate
is the certificate owned by the machine.
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Set whether to communicate using HTTP.
Value: Off, On
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Select whether to communicate using HTTPS.
Value: Off, On
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
485
Description
Settings
Description
*1
Description
*1*2
*1*2