Printing Document From Stored Job Box - Kyocera ECOSYS MA4000cifx Operation Manual

Print from PC > Printing Data Saved in the Printer

Printing Document from Stored Job Box

In Stored Job, the print data sent from the application is saved to the machine. You can set up a password as
necessary. If you set up a password, enter the password when printing. Print data will be stored in the Stored Job
Box after printing. This will allow printing of the same print data repeatedly.
1
Display the screen.
1
[Home] key > [Job Box]
2
Select [Private Print/Stored Job].
3 Select the creator of the document.
2
Print the document.
1 Select the document to print > [Print]
2 Enter the password.
3
Specify the number of copies to print as desired.
4 Select [Start Print].
Printing starts.
NOTE
If the document is protected by a password, the password entry screen will be displayed. Enter the
password.
Simple Job Printing
When you save a print job performed via user login to the Stored Job Box, logging in with an IC card at the time of
printing displays a list of your print jobs in the Stored Job Box. When you run the print job, printing starts
immediately.
User login administration that uses the optional IC Card Authentication Kit is required. For details on user login
administration for printing, refer to the following:
➡
Adding a User (Local User List) (page 519)
➡
Managing the Users that Print on This Machine from a PC (page 523)
For IC card settings, refer to the following:
➡
ID Card Settings (page 542)
For Simple Job Printing settings, refer to the following:
➡
Simple Job Printing (page 543)
205