System Menu > FunctionSettings
Printer
[System Menu / Counter] key > [FunctionSettings] > [Printer]
Item
[Emulation]
[Color Setting]
[Gloss Mode]
[EcoPrint]
[Override A4/Letter]
[Duplex]
Select the emulation for operating this machine by commands oriented
to other types of printers.
Value: [PCL6], [KPDL], [KPDL (Auto)]
NOTE
• When you have selected [KPDL (Auto)], set "Alt Emulation", too.
• When you have selected [KPDL] or [KPDL (Auto)], set "KPDL Error
Report", too.
KPDL Error Report
When an error has occurred during printing in KPDL emulation
mode, set whether or not the error report is output.
Value: Off, On
You can choose whether reports are printed in color or black and white.
Value: [Color], [Black & White]
Gloss Mode increases the effect of glossiness in printing. However,
printing takes longer time.
Value: Off, On
IMPORTANT
This function is not available when [Labels] or [Transparency] is selected
as the paper type setting.
➡
Paper Feeding (page 425)
Depending on the paper used, printing in gloss mode may cause curl in
paper. To reduce curl, try using thicker paper.
EcoPrint conserves toner when printing. This is recommended for test
copies where faded printing is not a problem.
Value: Off, On
Select whether to treat A4 size and Letter, which are similar in size, as the
same size when printing.
Value
Off
A4 and Letter are not regarded as the same in size.
On
A4 and Letter are regarded as the same in size. The machine will use
whichever size is in the paper source.
Select binding orientation for duplex mode.
Value: [1-sided], [2-sided (Bind Long Edge)], [2-sided (Bind Short Edge)]
461
Description