Ipsec; Restart The Network - Kyocera ECOSYS MA4000cifx Operation Manual

System Menu > NetworkSettings
Item
[IP Filter (IPv6)]

IPSec

[System Menu / Counter] key > [NetworkSettings] > "Network Settings" [IPSec]
Item
[IPSec]

Restart the network

[System Menu / Counter] key > [NetworkSettings] > "Network Settings" [Restart Network]
Item
[Restart Network]
Configure the IP Filter Setting. IP filter is a function used to restrict the
access to the machine by setting the IP address and protocol.
The IP address or network address of permitted hosts is set from
Command Center RX. Not setting the IP Filter will allow access from all
hosts.
Value: [Off], [On]
➡
Command Center RX User Guide
Set whether or not you use the IPSec.
Value: [Off], [On]
Restarts the network.
490
Description
Description
Description