Kyocera ECOSYS MA4000cifx Operation Manual page 715

Troubleshooting > Troubleshooting
3101 "Failed to send via FTP." is displayed
Message
Failed to send via FTP.
Check the network.
> The network cable is connected.
> The hub is not operating properly.
> The server is not operating properly.
Job is canceled. Press [End].
3101
Corrective Actions
Check your network settings.
1
Connect the network cable
Check that the LAN cable is properly connected.
If there is no improvement, proceed to the next step.
2
Check the operation of the hub.
Check that the hub access lamp is illuminated or flashing.
If there is no improvement, proceed to the next step.
3
Check the server status.
Make sure the server is running and responds to pings.
705