Canon 1100 Reference Manual page 166

Dispose of the waste toner.
Cause
Remedy : Follow the procedure given under 'Changing the Waste Toner Container', on p. 3-
Enter correct password.
Cause
Remedy : Enter the correct password, or contact the supervisor of the copier.
Image cannot fit on the paper.
4
Cause
Remedy : Change the amount of image shift. (See Chapter 2, 'Useful Copy Functions', in the
Inappropriate original.
Cause
Remedy : Check the originals. For information on the acceptable originals for the feeder
Insert a control card.
Cause
Remedy : Insert the Control Card. (See 'Before Copying', on p. 5-72.)
Insert the key.
Cause
Remedy : Insert the Security key into the main unit, then turn it to the right. (See 'Legal
Load staples.
Cause
Remedy : Replace the staple case according to the procedure described in 'Replacing the
4-32
Touch Panel Display Messages
: The waste toner container is full.
22.
: The system settings password entered is incorrect.
: The image is not within the boundaries of the paper.
Copying Guide.)
: A paper jam occurred because originals unsuitable for the feeder (option) were
loaded, or an excessive number of originals were loaded.
(option), refer to 'Acceptable Originals' (see p. 5-10).
: The Control Card is not inserted.
: The Security key is not inserted.
Limitation on Usage of Your Product and the Use of Images', on p. xxii.)
: The stapler has run out of staples.
Staple Case' (see p. 5-61).