Editor-F1
Together with the edit pen, the editor is used for area designations, shift position designations,
and selecting colours from the colour palette.
IMPORTANT
•
The IP-ED board (option) must be installed to install the editor.
Parts and Their Functions
=
mark
When placing the original on the editor, place it
with the side to be copied face up and align the
upper-right corner of the original with the
mark.
IMPORTANT
•
Do not use the editor near strong magnetic fields (cordless telephones etc.).
•
Do not push down hard on the area designation board.
•
Do not use the area designation board with conductors, such as metallic rulers, placed on it.
•
Do not pull hard on the cord of the edit pen.
•
When using the edit pen, avoid letting the cord come near to the tip of the edit pen.
•
Do not touch the tip of the edit pen. This may result in an incorrect entry.
•
Be careful not to let the connector of the editor come loose while the copier's power is turned on
because this may damage the copier.
>
Edit pen
?
Area designation board
@
Colour palette
A
Colour palette sheet withdrawal opening
5
5-3
Editor-F1