2
Select the function whose main settings screen you want displayed on the
Basic Features screen; then press [OK].
2
NOTE
•
If you do not want to display the main settings screen for any of these functions on the Basic Features
screen, press [No].
3
Press [Done].
NOTE
•
If you display the Basic Features screen immediately after changes have been made in Additional
Functions, the new screen is not displayed.
To make the changes effective, turn the power off and then on again, or press
Changing Settings for the Energy Saver Mode
Pressing
While in the Energy Saver mode, the temperature of the fixing unit is lowered, thus economizing
on electricity.
You can set the energy saving level to -10%, -25%, or -50%, or specify Return to Standard
Mode.
Energy Saving Level
-10%
-25%
-50%
Return to Standard Mode
NOTE
•
Increasing the energy saving level will economize more on electricity but lengthens the time the
copier takes to get ready for copying.
•
The default setting is "-10%".
2-10
Customising the Copier's Global Settings
(Energy Saver) on the control panel puts the copier into the Energy Saver mode.
Approximately 1 minute and 15 seconds
Approximately 3 minutes and 30 seconds
Approximately 7 minutes
0 minutes
Recovery Time
(Reset).