3
Place one sheet of original with the surface to be copied face down into the
single sheet document feeder.
Regardless of whether the originals are of vertical or horizontal orientation, always set originals with
their top edge along the back edge of the single sheet document feeder.
The original is automatically pulled into the feeder and copying begins.
IMPORTANT
5
•
If the Feeder Auto Start setting (see p. 2-23) is turned off, the original will not be automatically pulled
into the feeder and copied. Press
•
The original is delivered back to the single sheet document feeder after it has been copied. Be sure
to remove the original after you are finished copying.
•
If the original is curled, uncurl it completely before placing it into the single sheet document feeder.
5-14
Recirculating Document Feeder RDF-E3
(Start) to begin copying.