Changing The Auto Energy Saver Time - Canon 1100 Reference Manual

Changing the Auto Energy Saver Time

If the copier is left untouched for a specified period of time after a Copy job or a key input, the
copier will automatically lower the temperature of the fixing unit and go into the Energy Saver
mode. This is called the Auto Energy Saver function.
NOTE
•
The default setting is "30 min"..
2
1
Display the required screen as follows:
Press
2
Enter the desired time period using [-] and [+]; then press [OK].
The Auto Energy Saver Time can be set to 0 min, 1 min, 2 min, 5 min, 10 min, 20 min, 30 min, or 1 to 8
hours (1-hour increments).
When "0" is selected, the Auto Energy Saver function is not specified.
3
Press [Done].
2-34
Setting the Timer
(Additional Functions) → [Timer Settings] → [Auto Energy Saver Time]