5
Press the column for password, and enter a 4-digit number using
(Number keys). Then press [OK].
2
You cannot store "0000" as the password.
NOTE
•
When a password is not stored, you can use this copier by entering only the department ID.
•
You can delete the number you entered by pressing
6
Press [OK].
NOTE
•
If you selected [On] in step 2, Department ID Management is enabled. (See 'Entering the
Department ID and Password', on p. 1-27.)
7
Press [Done].
2-30
Customising the Copier's Global Settings
(Clear).
-