Safety - wtw inoLab 740 Operating Manual

inoLab 740
Target group
Symbols
ba75446e05 07/2010
2

Safety

This operating manual contains basic instructions that must be followed
in the commissioning, operation and maintenance of the inoLab 740
(terminal and measuring module) measuring system. Consequently, all
responsible personnel must read this operating manual carefully before
working with the measuring system.
The operating manual must always be available within the vicinity of the
measuring system.
The measuring system was developed for use in the laboratory.
Thus, we assume that, as a result of their professional training and
experience, the operators will know the necessary safety precautions
to take when handling chemicals.
used
Warning
indicates safety instructions that must be followed to prevent damage
to persons and property.
Note
indicates notes that draw your attention to special features.
Note
indicates cross-references to other documents, e.g. application
reports, operating manuals of probes, etc.
Safety
15