Table of Contents
Advertisement
BOD
138
33
Check the data on the display.
If the data is correct: Continue with step 40.
To change the data: Continue with step 34.
34
Enter a name with
barcode reader.
35
Swap between the entry fields with [Next].
36
Enter the volume of the sample in the Vol. sample field with
82
or an external keyboard.
37
Swap between the entry fields with [Next].
38
Enter the total volume of the sample dilution in the Vol.Total
82
field with
39
Immerse the sensor in the sample dilution.
40
Start the measurement with [Start].
The sample dilution is measured.
41
Wait for the end of the measurement.
82
, an external keyboard or via the
or an external keyboard.
inoLab 740
ba75446e05
07/2010
Advertisement
Table of Contents
