wtw inoLab 740 Operating Manual page 137

inoLab 740
Measurement of blank
value solutions
Measurement of sample
dilutions
ba75446e05 07/2010
22 Check the data on the display.
If the data is correct: Continue with step 24.
To change the data: Continue with step 23.
23 Enter a name with
reader.
24 Immerse the sensor in the blank value solution.
25 Start the measurement with [Start].
26 Wait for the end of the measurement.
27 Repeat from step 22 to step 26 until all blank value solutions
are measured. Subsequently, the Start measurement Sample
window opens.
28 Check the data on the display.
If the data is correct: Continue with step 32.
To change the data: Continue with step 29.
29 Enter a name for the sample dilution with
keyboard or via the barcode reader.
30 Swap between the entry fields with [Next].
31 Enter the number of the sample dilutions in the Number field
82
with or an external keyboard.
32 Confirm the settings with [Start].
The Start measurement Dilution 1 window appears.
82
, external keyboard or barcode
BOD
82
, an external
137