Table of Contents
Advertisement
inoLab 740
Starting AutoStore
ba75446e05
07/2010
11.1.2
Automatically storing measurement data records
AutoStore enables measurement data records to be stored at defined
time intervals. Starting AutoStore causes you to move to the Set
AutoStore input window where you define the details of the storage with
AutoStore.
ID:
The name (ID) identifies the measurement and makes it easier to
find the data in memory. The ID can consist of figures and letters
(when using an external IBM PC keyboard).
Duration:
Here you set up the measuring period for which the planned
AutoStore storing is to be performed.
Interval:
Here you determine the intervals at which the measuring data
records will be stored.
Memory requirements (datasets):
Here you obtain information on how many storage locations are
required with the current settings.
Available memory locations:
Here you obtain information on how many storage locations are still
available.
Note
If insufficient memory locations are available, a message appears on
the display.
Change the entries in the Duration and/or Interval field until an
available number of memory locations is displayed.
Measurement data records can only be stored in a free memory
location. If necessary, the contents of the memory must be deleted (see
page 176).
1
Switch to the Menu mode.
46
2
Use
to select the main Mem menu.
3
Select the AutoStore menu item with
Data storage
82
.
169
Advertisement
Table of Contents
