Strong SRT 7010 User Manual page 17

2. Select your favourite programme by p/q and press OK to switch to it.
3. Now in viewing mode you can select channels from the chosen favourite group only
by pressing p/q. If you want to change to the main channel list, press OK in viewing
mode and then press 4 and select All TV list.
Delete a TV or radio programme
1. Select the programme you want to delete and press the BLUE button. A message will
appear. Press OK to delete the programme or  to cancel.
2. Repeat the previous step to delete more programmes.
Skip TV or radio programme
1. Select the programme you want to skip and press the GREEN button.
2. The programme will be marked to skip. The receiver will skip this programme while
zapping between programmes in normal viewing mode (in channel list mode the
skipped channels remain selectable).
3. Repeat the previous step to skip more programmes.
4. To confirm and exit the menu, press .
Disable a skipped TV or radio programme
Press the GREEN button on the programme marked with the skip symbol.
Move a TV or radio programme
1. Select the programme you want to move, then press the RED button. A move symbol
will appear.
2. Press p/q tu to move the programme.
3. Press OK or RED again to confirm the new position.
4. Repeat the above steps to move more channels.
Locking programmes
You can lock selected programmes for restricted view.
1. Select the programme you want to lock, then press the YELLOW button. The
programme is now marked as locked.
2. Repeat the previous step to select more programmes
3. To confirm and exit the menu, press .
To view the locked programme, you need to enter either the default password '0000' or your last set
password. We recommend changing of the default password to one of your preference. Please refer
to chapter 7.6 System for more details.
Disable a locked TV or radio programme
Press the YELLOW button on the programme marked with the lock symbol.
Rename a TV or radio programme
1. Select the programme you want to rename and press 9. A key table appears.
2. In the key table select a character by using the navigation buttons. Press OK to enter
the character. When you have entered the new name, navigate to the "OK" button on
screen and press OK on the remote control to confirm the new name.
13