Strong SRT 7010 User Manual page 28

INFO again or . Use the BLUE button and enter the time moment you want to jump to with the
0~9 buttons, then press OK to confirm. With the 5 6 buttons you can rewind or forward playback in
x2, x4, x8, x16 and x32 speed. When it has fast rewound to the beginning, playback of the current file
will be resumed. When it has fast forwarded to the end, playback of the next file starts. With the 7 8
buttons you can jump to the previous/next video file.
7.7.2 Photo Configure
Slide Time:
Slide Mode:
Aspect Ratio:
7.7.3 Movie configure
This subtitle function is only relevant in the Movie menu for movies which contain subtitle files in .srt
or txt format.
During playback, press SUB to select a language and confirm with OK. During playback of Movie files
you can press SUB twice to change the subtitle settings described below:
Subtitle Specific:
Subtitle BG:
Subtitle FontColour:
7.7.4 DVR, Timeshift and Format*
*This user manual describes the full functionality including the recording function and may not be applicable if the software for recording via USB has
not yet been installed.
7.7.4.1 Instant recording*
To directly record a programme, press the 4 button to start the recording and press 3 to quit. During
a recording it is possible to press the p/q buttons or the OK and p/q buttons to change to another
channel on the same transponder only. It is not possible to use the 0-9 buttons.
7.7.4.2 Timeshift*
If you want to use the Timeshift function you only need to press 2 in viewing mode. To playback
timeshifted content, press u or 2 again. During playback you can use the 5 6 or 2 buttons. To
quit the Timeshift mode, press 3. If you haven't pressed 3 the Timeshift mode will be kept in the
background. If the channel is changed timeshifted content will only be accessible from the new
selected channel.
7.7.4.3 Timer recording
There are 2 ways to set a timer:
Programming a timer via the EPG
The easiest way to record an event is via the EPG. Press the EPG button to open the EPG, then tu to
select a channel. After that, press p/q to select an event. You can book a timer by pressing the OK
button. The event data will be applied and you only need to press the p/q buttons to select Mode
24
You can adjust the slide show interval to 1~8 seconds.
You can select one of the 60 slide show effects or Random (mixed effects).
Keep - displays the picture as its original aspect
Discard - displays the picture in full screen mode.
Choose subtitle size between Small, Normal and Big.
Choose subtitle background between White, Transparent, Gray and Yellow-
Green.
Choose subtitle font colour between Red, Blue, Green, White and Black.