Changing Front Axle Case Oil (N); Changing Front Axle Case Oil (N) - Kioti CS2510H Operation Instructions Manual

7
1
- cs2510h/cs2610h

ChANGING fRONT AxlE CAsE OIl (N)

(1) oil filler plug (2) Drain plug
(3) oil check plug
CS2510,2610-유럽,호주향-07.indd 18
1 to drain the used oil, remove the
right and left drain plugs and filling
plug at the front axle case and drain
the oil completely into the oil pan.
2. after draining reinstall the drain
plugs.
3. remove the oil filler plug and oil
level check plug. (commonly shared
component)
M46O716A
(1) oil check plug
4. Add new oil to the specified level of
the check plug through the oil filler.
(refer to "lubrication" in the chap-
ter "service")
5. tighten the oil filler plug and oil
check plug after replenishment.
6. check the oil level after 15 minutes
and add oil as necessary.
Oil capacity
2.0 l (0.53 u.s.gal.)
M46O745A
2020-11-10 오전 9:08:05