Kioti CS2510H Operation Instructions Manual page 33

swinging and shaking during trans-
port and work that could jeopardize
the stability of the tractorimplement
assembly.
• the cardan shaft must be always
ce-marked, provided with suit-
able guards and suitable to tractor-
implement coupling. follow all
directions of the operation manual,
concerning both the fastening ac-
cording to connection direction and
safety rules to avoid rotation of
protections (chains) and overlaying
of the telescopic tubes. also keep
articulation angles.
WARNING
•
when a tractor with safety
frame is equipped with a front
loader, there is still a risk if the
implement is improperly used.
this risk is due to objects fall-
ing from above. the operator
has no protection against this
risk.
CS2510,2610-유럽,호주향-01.indd 23
to reduce risks, the following precau-
tions should be used.
- only use loader equipped with a
load self-levelling system, i.e. of the
parallelogram type.
- only use specific implements for
the operation to be performed.
strictly follow the directions and
warnings in the loader's operation
manual.
- use the machine and the imple-
ment with caution, drive on plane
ground and avoid pits, excavations
and ditches. do not turn, start or
stop abruptly.
- if a front loader is mounted, it is
advisable to use a tractor with cab
or with a 4-post frame with fops
safety system. the loader installer
should carefully analyze all risks
and make all required adjustments.
safetY precautions
• hitch loads to the drawbar only.
towing or attaching to other loca-
tions may cause the tractor to over-
turn.
• improper use of the drawbar, even
if correctly positioned, can cause a
rear overturn.
• do not overload an attachment
or towed equipment. use proper
counterweights to maintain tractor
stability. hitch heavy loads to the
drawbar only.
1
2
-
1
Tg2O111a
2020-04-03 오전 9:40:26