Checking Fuel Lines (U); Checking Fuel Lines (U) - Kioti CS2510H Operation Instructions Manual

7

- cs2510h/cs2610h
4. when cleaning the element, refer
to the instructions that follow.
5. if the element is stained with car-
bon , dust or oil, replace the filter.
6. change the element every 6 months
or every 100 hours.
to clean the element, use only clean
dry compressed air on the inside
of the element. air pressure at the
nozzle must not exceed 29 psi (2 kgf/
cm²). maintain reasonable distance
between the nozzle and the filter.
IMPORTANT
The air cleaner will only fulfill

its function if it is correctly
and regularly maintained. A
poorly maintained air cleaner
will mean loss of power, ex-
cessive fuel consumption and
a reduction in engine life.
CS2510,2610-유럽,호주향-07.indd 22
IMPORTANT
Do not run the engine with fil-

ter element removed.
Be sure to refit the cap with the

arrow (on the rear of cover)
upright. If the cap is improperly
fitted, evacuator valve will not
function and dust will adhere
to the element.
EVACUATOR VAlVE
open the evacuator valve once a
week under ordinary conditions or
daily when used in dusty conditions
to get rid of large particles of dust
and dirt.

ChECkING fUEl lINEs (U)

2 2
1 1
2 2
(1) fuel pipe (2) tightening Band
although checking the fuel pipe con-
nection is recommended every 100
service hours, it should be done ev-
ery 6 months if operation does not
exceed 100 hours in 6 months.
1. if the hose clamps are loose, apply
a slight coat of lubricant onto the
threads and securely tighten it.
2. the fuel pipe is made of rubber and
ages regardless of period of ser-
vice. change the fuel pipe together
with the hose clamps every two
tb2O705A
2020-11-10 오전 9:08:09