Kioti LK30 Manual
  1. Manuals
  2. Brands
  3. Kioti Manuals
  4. Tractor
  5. LK30
  6. Manual
Kioti LK30 Manual

Kioti LK30 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

FOREWORD
Congratulations, and welcome to the fabulous world of LK30/LK35 ownership, where serious work is made
fun again!
This versatile tractor is a culmination of the entire tractor and diesel knowledge gained by the Daedong In-
dustrial Co.,LTD since 1947. It has been designed with the finest materials and under rigid quality control
standards set forth by the KIOTI Engineering Department.
Knowledge of tractor operation is essential for many years of dependable service and reliability. To help
new owner's familiarize themselves with the KIOTI LK30/LK35, it is the policy of KIOTI tractor to provide an
owner's manual which includes helpful information about tractor safety, operation and maintenance. If the
information you seek is not found in this manual, your KIOTI tractor dealer will be happy to help you.
Please feel free to contact DAEDONG IND. CO.,LTD with your questions/concerns.
LK35-AU-00.indd 1
2010-01-20 오후 2:58:34

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LK30 and is the answer not in the manual?

Questions and answers

Related Manuals for Kioti LK30

Summary of Contents for Kioti LK30

  • Page 1 Knowledge of tractor operation is essential for many years of dependable service and reliability. To help new owner’s familiarize themselves with the KIOTI LK30/LK35, it is the policy of KIOTI tractor to provide an owner’s manual which includes helpful information about tractor safety, operation and maintenance. If the information you seek is not found in this manual, your KIOTI tractor dealer will be happy to help you.
  • Page 2 SAFETY AND VEHICLE DAMAGE WARNING This manual includes information titled as WARNING, CAUTION, IMPORTANT and NOTE. These titles indicate the following: This indicates that a condition may result in harm, serious in- jury or death to you or other persons if the warning is not heed- ed.
  • Page 3 ABBREVIATION LIST DEFINITIONS ABBREVIATIONS Four Wheel Drive American Petroleum Institute American Society of Agricultural Engineers, USA ASAE American Society of Testing and Materials, USA ASTM Feet Per Minute High Speed-Low Speed Hi-Lo Hydrostatic Transmission Meters Per Second Power Take Off P.T.O Right-hand and Left-hand sides are determined by facing in the direction of forward travel RH/LH...
  • Page 4 LK35-AU-00.indd 4 2010-01-20 오후 2:58:34...
  • Page 5 UNIVERSAL SYMBOLS Various universal symbols have been used on the instruments and controls of your KIOTI tractor. Below is a list of the universal symbols and their meanings. Fuel-Level Position Control-Lowered Position Low Range Engine Coolant-Temperature Hazard Warning Lights Coolant...
  • Page 6 LK35-AU-00.indd 6 2010-01-20 오후 2:59:22...

  • Page 7: Table Of Contents

    TABLE OF CONTENTS SAFETY PRECAUTIONS ..........SERVICING OF TRACTOR ..........SPECIFICATIONS ............DESCRIPTION OF OPERATING SYSTEM ...... OPERATION ..............SECTION THREE-POINT HITCH & DRAWBAR ....... HYDRAULIC UNIT ............TIRES, TREAD AND BALLAST ........MAINTENANCE ..............PERIODIC SERVICE ............STORAGE ................. TROUBLESHOOTING ............
  • Page 8 LK35-AU-00.indd 8 2010-01-20 오후 2:58:43...
  • Page 9 SAFETY PRECAUTIONS BEFORE OPERATING THE TRACTOR ....... 1-2 OPERATING THE TRACTOR ........1-5 DRIVING THE TRACTOR ..........1-8 PARKING THE TRACTOR ........... 1-9 OPERATING THE P.T.O ..........1-10 USING 3-POINT HITCH ..........1-10 SERVICING THE TRACTOR ........1-11 TRACTOR SAFETY LABELS ........1-14 LK35-AU-01.indd 1 2010-01-20 오후...

  • Page 10: Before Operating The Tractor

    LK30 / LK35 BEFORE OPERATING THE TRACTOR A careful operator is the best opera- tor. Most accidents can be avoided by observing certain precautions. To help prevent accidents, use these safety precautions, and pay attention to the job at hand. If you can prevent an accident, your time will have been well spent.

  • Page 11: Safety Precautions

    18. No alterations should be made should always be used. This will to your KIOTI tractor without first help to prevent accidental slips consulting your KIOTI dealer. trips and falls. 15. Be sure to scrape off mud or soil from your shoes before mounting the tractor.
  • Page 12 LK30 / LK35 20. For your safety ROPS with a seat belt is recommended for most applications. NOTE Always use seat belt when  the tractor is equipped with a ROPS and CAB. Never use the seat belt when tractor is...

  • Page 13: Operating The Tractor

    SAFETY PRECAUTIONS OPERATING THE TRACTOR S41O108a S41O110a S41O109a 1. Avoid accidental contact with gear 2. Do not park your tractor on a steep 3. Do not operate your tractor in an shift levers while the engine is run- incline, and remember to shut off enclosed building without the prop- ning.
  • Page 14 LK30 / LK35 S41O111a S41O112a S41O113a (1) Drawbar 4. Make sure that all pressure lines are 6. If The front of the tractor tends to 7. Always use the proper ballast tight before starting the tractor. rise up when heavy implements are...
  • Page 15 SAFETY PRECAUTIONS 9. Do not leave equipment in the raised position when the vehicle is stopped or unattended. 10. When using implements or at- tachments with your tractor you should first read their respective owner’s manual. You should al- ways keep their safe operation procedures in mind.

  • Page 16: Driving The Tractor

    LK30 / LK35 DRIVING THE TRACTOR S41O116a S41O117a S41O118a (1) Brake Pedal Lock (2) Brake Pedal (L) (1) SMV Emblem (3) Brake Pedal (R) 1. Lock the brake pedals togeth- 2. Always slow the tractor before turn- 3. Make sure that the Slow Moving Ve- er when traveling at road speeds.

  • Page 17: Parking The Tractor

    SAFETY PRECAUTIONS PARKING THE TRACTOR 4. Observe all local traffic and safe- ty regulations. 5. Turn the headlights ON. Dim them when meeting another ve- hicle. 6. Drive at speeds that allow you to maintain control at all times. 7. Do not apply the differential lock while traveling at road speeds.

  • Page 18: Operating The P.t.o

    LK30 / LK35 OPERATING THE P.T.O USING 3-POINT HITCH S41O120a S41O121a S41O122a (1) P.T.O Shaft Cover (1) 3-point hitch lowering speed knob (2) P.T.O Shaft Cap (A) “FAST” (B) “SLOW” (C)”LOCK” 1. Make sure the tractor is complete- 3. Before installing or using P.T.O driv- 1.

  • Page 19: Servicing The Tractor

    SAFETY PRECAUTIONS SERVICING THE TRACTOR S41O123a S41O124a S41O125a In order to service your tractor you 2. Allow the tractor time to cool off 6. Do not remove the radiator cap must park it on a flat level surface, set before servicing any part that may while the coolant is hot.
  • Page 20 LK30 / LK35 S41O126a S41O127a S41O128a (1) Cardboard (3) Magnifying Glass (2) Hydraulic Line 7. When working with your tractor’ s 9. Tire mounting should be done by 12. Make sure that wheel bolts have been tightened to the specified...
  • Page 21 SAFETY PRECAUTIONS S41O129a S41O130a 14. Fluid escaping from pinholes may 15. Keep environmental pollution in be invisible. Do not use hands to mind. When replacing coolant, search for suspected leaks; dispose of old coolant in a proper manner. Use a piece of cardboard or wood, instead.

  • Page 22: Tractor Safety Labels

    LK30 / LK35 TRACTOR SAFETY LABELS S41O131a LK35-AU-01.indd 14 2010-01-20 오후 3:02:55...
  • Page 23 SAFETY PRECAUTIONS (1) Part No. : T4261-50491 (3) Part No. : T2325-50743 (5) Part No. : T2241-50702 TO AVOID POSSIBLE INJURY OR DEATH Do not start engine by shorting across starter terminals. Machine may start in gear and move if normal starting circuitry is bypassed.
  • Page 24 LK30 / LK35 (7) Part No. : T2625-50721 (9) Part No. : T4625-52351 WARNING Death or inury may result from tractor roll over. When operating this tractor with the ROPS in the down position, the chance for serious injury or death is increased.

  • Page 25: Servicing Of Tractor

    SERVICING OF TRACTOR servicing..............2-2 LK35-AU-02.indd 1 2010-01-20 오후 3:07:09...
  • Page 26 The transmission serial num- major service, be sure to see your ber is located on the left side of the KiOTi dealer. For service, contact transmission case. Locate the serial the.KiOTi dealership from which you numbers now and record them in the purchased your tractor or your local space provided.

  • Page 27: Specifications

    SPECIFICATIONS SPECIFICATIONS............3-2 TRAVELING.SPEED............3-5 IMPLEMENT.LIMITATION..........3-6 LK35-AU-03.indd 1 2010-01-20 오후 3:10:08...
  • Page 28 LK30 / LK35 SPECIFICATIONS MODEL ITEM LK30 LK35 30 (22.4)/2,600 34 (25.4)/2,600 Engine Power Gross HP(kW)/rpm Model 3A150LXB 3A165LWB Type Indirect injection, vertical, water-cooled, 3-cycle diesel engine Number of Cylinder 83 x 92.4 (3.27 x 3.67) 87 x 92.4 (3.0 x 3.0) Bore and stroke mm(in.)
  • Page 29 SPECIFICATIONS MODEL ITEM LK30 LK35 Overall length (with 3p) 2,830 (111.4) mm(in.) Overall length (with 3p&front weight) mm(in.) Overall width (minimum tread) 1,314 (51.7) mm(in.) Overall height (Top of ROPS) 2,250 (88.6) mm(in.) Overall height (Top of CAP) mm(in.) 1,640 (64.6) Wheel base mm(in.)
  • Page 30 LK30 / LK35 MODEL ITEM LK30 LK35 Maximum lifting capacity 1,015 (2,238) kg(lbs) Standard : 1valve (Double acting valve) : AU No. of standard remote valves Option : 1valve (Double acting valve) : USA Live PTO Shaft 540 / 2,600...
  • Page 31 SPECIFICATIONS TRAVELING.SPEED * At rated engine speed with Std. tires. km/h(mile/h) 8 x 8 (2,600rpm) Operating the lever Forward Reverse Hi-Low Main LK30 LK35 LK30 LK35 1.36 (0.84) 1.31 (0.81) 1.24 (0.77) 1.20 (0.74) 1.89 (1.17) 1.82 (1.13) 1.72 (1.06) 1.66 (1.03)
  • Page 32 KIOTI and which exceed the maximum specifications listed below, or which are otherwise unfit for use with this KIOTI tractor may result in malfunctions or failures of the tractor, damage to other property and injury to the operator or others. [Any malfunctions or failures of the tractor resulting from use with improper implements are not covered by the warranty.]...
  • Page 33 SPECIFICATIONS Implement Remarks LK30 / LK35 Remarks Operating Capa.300kg(660lbs) Loader Max. Bucket width mm(in) 1,524(60) and below Do not use 3 point hitch backhoe Backhoe with sub frame Max. Diging depth mm(ft.in) 2,280(89.7) and below Mid Mower Max. Cutting width...
  • Page 34 MEMO MEMO LK35-AU-03.indd 8 2010-01-20 오후 3:10:11...

  • Page 35: Description Of Operating System

    DeSCRIPTION OF OPeRATING SYSTeM exterior view ............4-2 instrument Panel anD switCHes ..... 4-4 foot anD HanD Controls ........4-5 LK35-AU-04.indd 1 2010-01-20 오후 3:11:17...
  • Page 36 LK30 / LK35 LK30 / LK35 exterior view (1) Seat (2) Steering Wheel (3) Fuel Cap Cover (4) Hood/Bonnet (5) Head Light (6) ROPS (7) Turn Signal Lamp (8) Fender S41O401a LK35-AU-04.indd 2 2010-01-20 오후 3:11:18...
  • Page 37 DESCRIPTION OF OPERATING SYSTEM DESCRIPTION OF OPERATING SYSTEM (1) Turn Signal Lamp (2) Top Link (3) Transmission Oil Inlet Tube (4) Lifting Rod (5) PTO Shield (6) Lower Link (7) Draw Bar (8) Check Chain S41O402a LK35-AU-04.indd 3 2010-01-20 오후 3:11:20...
  • Page 38 LK30 / LK35 LK30 / LK35 instrument Panel anD switCHes (1) Fuel Gauge (2) Tachometer (3) Coolant Temp. Gauge (4) Main Shift Lever (5) Left Turn Indicator (6) Right Turn Indicator (7) Hand Throttle Lever (8) Head Light Switch (9) Turn Signal Switch...
  • Page 39 DESCRIPTION OF OPERATING SYSTEM DESCRIPTION OF OPERATING SYSTEM foot anD HanD Controls (1) Clutch Pedal (2) Brake Pedal (L) (3) Brake Pedal (R) (4) Transmission Oil Inlet Cap (5) Foot Throttle Pedal (6) Hi-Lo Shift Lever (7) PTO Shift Lever (8) Front Wheel Drive Lever (9) Parking Brake Lever (10) Differential Lock Pedal...
  • Page 40 MEMO memo LK35-AU-04.indd 6 2010-01-20 오후 3:11:25...

  • Page 41: Operation

    OPERATION Pre-oPeration............5-2 oPeratinG.neW.traCtor........5-3 oPeratinG.tHe.enGine........... 5-4 oPeratinG.tHe.traCtor........5-11 LK35-AU-05.indd 1 2010-01-20 오후 3:12:31...

  • Page 42: Pre-Operation

    LK30 / LK35 Pre-oPeration Daily.CHeCk CHeCk.item It is a good practice to know the con- - Walk around inspection. dition of your tractor before you start - Check the engine oil level it. You should do routine check before - Check the transmission oil level each use.

  • Page 43: Operating.new.tractor

    OPERATION oPeratinG.neW.traCtor CHanGinG. lUBriCatinG. oil. For.neW.traCtorS How a new tractor is handled and In handling a new tractor, the follow- Special attention should be given to maintained determines the life of the ing precautions should be observed. new tractors lubrication oil. New parts tractor.

  • Page 44: Operating.the.engine

    LK30 / LK35 oPeratinG.tHe.enGine StartinG.tHe.enGine CaUtion IMPORTANT to.avoid.personal.injury: . make. sure. that. the. parking.  you. must. read. and. under- brake. pedals. are. fully. de-  stand. the. warning. and. cau- pressed. before. pulling. the. tion.labels.on.your.tractor. parking.brake.lever.up. Proper.ventilation.is.required.  note when.
  • Page 45 OPERATION main.Gear.SHiFt.lever.&.Hi-lo Gear.SHiFt.lever The main gear shift lever pattern is in the form of an “H”. The hi-lo gear shift lever moves two stages, “high” and “low”. By combination and use of the main gear shift lever and the hi-lo gear shift lever, it is possible to obtain four speeds forward and reverse in “high”...
  • Page 46 LK30 / LK35 S41O504a S41O505a S41O506a (1) Position Control Lever (1) Hand Throttle Lever (1) Key Switch (A) “DOWN” “INCREASE” ) Off ) Manual Pre-Heat “DECREASE” ) Start ) On(Auto Pre-Heat) 5..move.tHe.PoSition.Control. 6..Set.tHe.tHrottle.lever.to. 7..inSert.tHe.key.into.tHe.key. lever.ForWarD. aBoUt.HalF.Way SWitCH. . anD. tUrn. it. “on”..
  • Page 47 OPERATION 1. Be careful not to run the starting mo- note tor longer than 10 seconds due to . When ambient temperatures  its heavy current consumption. are colder, a longer pre-heat 2. If it is not started in 10 seconds stop time is necessary.
  • Page 48 LK30 / LK35 StoPPinG.tHe.enGine If the lamp is still on, immediately stop the engine and determine the cause. [CHeCk.WarninG.lamPS] 1. When the key is turned “ON”, lamps (2), (3) should come on. If trouble should occur at any location while...
  • Page 49 OPERATION WarminG.UP Warm-UP.anD.tranSmiSSion.oil.in. tHe.loW.temPeratUre.ranGe ambient Warm-up time CaUtion Hydraulic oil serves as transmis-  temperature requirement During.warm.up.of.the.engine,. sion fluid. In cold weather, the oil  above 0 °C be.sure.that.the.parking.brake. may be cold with increased viscos- at least 5 minutes (32 °F) is.set.
  • Page 50 LK30 / LK35 JUmP.StartinG When jump starting the engine, follow 7. If the helper battery is in another ve- the instructions below to safely start hicle, do not allow the tractor and the engine. the other vehicle to touch. Start the vehicle’s engine after connecting...

  • Page 51: Operating.the.tractor

    OPERATION oPeratinG.tHe.traCtor (2).travel.aDJUStment Pull out the position adjust lever and slide the seat backward or forward, as required. IMPORTANT . after. adjusting. the. operator’s.  seat,.be.sure.to.check.that.the. seat.is.properly.locked. S41O511a S41O512a (1) Seat (2) Position Adjuster Lever (1) Seat Belt (A) “PULL IN” 1..aDJUStinG.
  • Page 52 LK30 / LK35 S41O513B S41O514a S41O515a (1) Hazard / Turn Signal Indicator (1) Head Light Switch (1) Brake Pedal (L) (2) Brake Pedal (R) (2) Turn Signal Light Switch (A) “OFF” (B) “ON (LOW)” (3) Brake Pedal Lock (3) Hazard Light Switch (C) “ON (HIGH)”...
  • Page 53 OPERATION 3..CHeCkinG.tHe.Brake.PeDal (1) BRAKE PEDAL (RIGHT AND LEFT) WarninG to.avoid.personal.injury: applying.one.rear.wheel.brake.  at.a.time.can.cause.the.tractor. to. swerve. or. roll. over. at. high. speeds. 1. Before operating the tractor on the S41O516a S41O517a road or before applying the parking (1) Position Control Lever (1) Clutch Pedal (A) UP brake, be sure to interlock the right...
  • Page 54 LK30 / LK35 IMPORTANT to.help.prevent.premature.clutch. wear. . the.clutch.pedal.must.be.en-  gaged.slowly.and.disengaged. quickly. Do. not. rest. your. foot. on. the.  clutch.pedal. Select. the. proper. gear. and.  engine. speeds. according. to. the.type.of.job.you.are.doing. S41O518a (1) Main Gear Shift Lever (N) Neutral Position...
  • Page 55 OPERATION 6..SeleCtinG.tHe.travel.SPeeD IMPORTANT (1).main.SHiFt.lever . To avoid transmission damage,  The main shift is fully synchronized to depress clutch pedal and stop shift without stopping just by depress- tractor before shifting between ing the clutch pedal. ranges. . in. high. shift. ranges. and. low.  (2).SHUttle.SHiFt.lever engine.rpm,.the.vehicle.could. Push forward or pull backward to be.
  • Page 56 LK30 / LK35 Front. WHeel. Drive. iS. eFFeC- tive.For.tHe.FolloWinG.JoBS: 1. When greater pulling force is need- ed, such as working in a wet field, when pulling a trailer or when work- ing with front-end loader. 2. When working in sandy soil.
  • Page 57 OPERATION StoPPinG 1. Slow the engine to idle 2. Depress the clutch and brake ped- 3. After the tractor has stopped, dis- engage the P.T.O, lower the imple- ment, shift the transmission into neutral, release the clutch pedal and set the parking brake. LK35-AU-05.indd 17 2010-01-20 오후...
  • Page 58 LK30 / LK35 CHeCk.DUrinG.DrivinG immeDiately.StoP.tHe.enGine.iF The engine suddenly slows or ac-  celerates. Unusual noises are heard.  Exhaust fumes become dark.  While driving make the previous checks to ensure that all parts are functioning properly. S41O523a (1) Fuel Gauge...
  • Page 59 OPERATION inStrUment.ClUSter If warning lamps come on while op- erating the engine, immediately stop the engine and check for the cause. Never operate the tractor while warn- ing lamps are on. S41O524a (1) Fuel Gauge (5) Glow Plug Indicator (2) Tachometer (6) Engine Oil Pressure Warning Lamp (3) Coolant Temperature Gauge (7) Battery Charging Warning Lamp...
  • Page 60 LK30 / LK35 taCHometer FUel.GaUGe Coolant.temPeratUre.GaUGe S41O525a S41O526a S41O527a (1) Tachometer (2) Hourmeter (1) Fuel Gauge (1) Coolant Temperature Gauge “E” EMPTY “F” FULL “C” COOL “H” HOT The tachometer indicates the engine When the key switch is on, the fuel When the key switch is turned “ON”...
  • Page 61 . For checking and servicing of the engine is accelerated above 1,000  your tractor, consult your local rpm, turn off the engine immediately kioti dealer for instructions. and check the engine oil level. LK35-AU-05.indd 21 2010-01-20 오후 3:12:50...
  • Page 62 LK30 / LK35 GloW.PlUG.inDiCator ParkinG ParkinG.Brake.lever 1. When parking, be sure to set the parking brake. To set the parking brake; 1) Interlock the brake pedals. 2) Depress the brake pedals. 3) Latch the brake pedals with the parking brake lever.
  • Page 63 OPERATION oPeratinG.teCHniQUeS DiFFerential.loCk If one of the rear wheels should IMPORTANT slip,use the differential lock. This will . to. prevent. damage. to. the.  cause both wheels to turn together. parking. brake. lever,. make. The differential lock is engaged only sure.that.brake.pedals.are.ful- when the pedal is depressed.
  • Page 64 LK30 / LK35 oPeratinG.tHe.traCtor.on.a.roaD. oPeratinG. on. a. SloPeS. anD. roUGH.terrain Make sure that the warning lamps and SMV sign are clean and visible at all CaUtion times. If you are towing rear mounted to.avoid.personal.injury: equipment or implements you will always.back.up.when.going.
  • Page 65 3. To avoid tire wear and front-end damage only turn steering wheel E/G rpm PTO shaft PTOrpm while moving. LK30 / LK35 2,610 6-Spline 4. The power steering mechanism 6-Spline 1,000 LK30 / LK35 2,625 makes the steering easier. Be care-...
  • Page 66 LK30 / LK35 P.t.o.SHaFt.Cover.anD.SHaFt.CaP 1. The tractor has two P.T.O speeds IMPORTANT position. . to. avoid. shock. loads. to. the.  2. P.T.O shifting needs clutch opera- P.t.o,. reduce. engine. speed. tion. Press the clutch pedal down when.engaging.the.P.t.o,.then. completely to stop the tractor move- open.the.throttle.to.the.recom-...

  • Page 67: Three-Point Hitch & Drawbar

    THREE-POINT HITCH & DRAWBAR THREE-POINT HITCH & DRAWBAR ......6-2 3-POINT HITCH ............6-3 DRAWBAR ..............6-4 LK35-AU-06.indd 1 2010-01-20 오후 3:14:08...
  • Page 68 LK30 / LK35 LK30 / LK35 THREE-POINT HITCH & DRAWBAR (1) Top Link (2) Lifting Rod (Left) (3) Lifting Rod (Right) (4) Lower Link (5) Drawbar (6) Check Link S41O601a LK35-AU-06.indd 2 2010-01-20 오후 3:14:10...
  • Page 69 THREE-POINT HITCH & DRAWBAR THREE-POINT HITCH & DRAWBAR 3-POINT HITCH OPERATION TOP LINk CAUTION CAUTION Do not stand between tractor Be aware and cautious of your   and implement unless parking surroundings. brake is applied. Make your tractor balanced ...
  • Page 70 LK30 / LK35 DRAWBAR Adjust the check chain so that the implement can move 5 to 6 cm(2.0 to 2.4 in.) laterally. Check chain shouid be tight enough to prevent excessive implement move- ment when implement is in raised po- sition.

  • Page 71: Hydraulic Unit

    HYDRAULIC UNIT 3-POINT HITCH CONTROL SYSTEM ......7-2 AUXILIARY HYDRAULICS ........... 7-3 LK35-AU-07.indd 1 2010-01-20 오후 3:15:11...
  • Page 72 Unless corrected the unit will be dam- aged. Contact your KIOTI deal- er for adjustment. LK35-AU-07.indd 2 2010-01-20 오후 3:15:12...
  • Page 73 HYDRAULIC UNIT AUXILIARY VALVE IMPLEMENT LOWERINg LIMIT 3-POINT HITCH LOWERINg HYDRAULIC RELIEF VALVE SPEED t46O702a t46O703a t46O705a (1) Position Control Lever (1) 3-Point Lowering Speed Knob (1) To the Tank (2) Lock Bolt (A) “FAST” (B) “SLOW” (2) Relief Valve (C) “LOCK”...
  • Page 74 Serious infection or reaction can de- velop if proper medical treat- t46O707a ment is not administered im- (1) Double Acting Lever (A) A PORT (B) B PORT mediately.damaged. Contact your KIOTI dealer for adjustment. LK35-AU-07.indd 4 2010-01-20 오후 3:15:14...
  • Page 75 3. Insert the implement coupler to the NOTE tractor hydraulic coupler. IMPORTANT Your local KIOTI Dealer can 4. Pull the implement coupler slight-  Do not hold the lever in the  supply parts to adapt couplers ly to make sure couplers are firmly “pull”...
  • Page 76 MEMO MEMO LK35-AU-07.indd 6 2010-01-20 오후 3:15:15...

  • Page 77: Tires, Tread And Ballast

    TIRES, TREAD AND BALLAST TIRES................8-2 TREAD................8-3 BALLAST............... 8-5 LK35-AU-08.indd 1 2010-01-20 오후 3:16:31...
  • Page 78 LK30 / LK35 TIRES InfLATIon.PRESSuRE. Though the tire pressure is factory-set to the prescribed level, it naturally drops WARnInG slowly in the course of time. Thus, check it everyday and inflate as necessary. To.avoid.personal.injury: Do.not.attempt.to.mount.a.  LK30 / LK35 tire.. This. should. be. done.
  • Page 79 Front tread can not be adjusted. Model Tire sizes Tread IMPORTANT . Do not turn front discs to ob- 7-14 / 6PR 1,105 (43.5)  tain wider tread. LK30 27-8.5-15 / 6PR 1,126 (44.3) Turf LK35 25-8.5-14 / 4PR 1.146 (45.1) Industrial T46O801b (A) Thread LK35-AU-08.indd 3...
  • Page 80 LK30 / LK35 REAR.WhEELS mm(in.) Turf Industrial Model 1,020 1,060 1,134 1,150 1,268 1,145 1,168 LK30 / LK35 (40.2) (41.7) (44.7) (45.3) (49.9) (45.1) (46.0) (A) Tread Tire size T46O802A Model Turf Industrial LK30 / LK35 11.2-24/6PR 41 x 14.0-20/4PR 15-19.5/6PR...
  • Page 81 The amount of er’s manual for the required amount weight should directly correspond of weight or contact your local KIoTI to the job at hand and should be re- dealer for a recommendation. moved when not needed.
  • Page 82 MEMO MEMo LK35-AU-08.indd 6 2010-01-20 오후 3:16:35...

  • Page 83: Maintenance

    MAINTENANCE SERVICE INTERVALS ..........9-2 LUBRICANTS ............... 9-4 LK35-AU-09.indd 1 2010-01-20 오후 3:17:46...
  • Page 84 LK30 / LK35 SERVICE INTERVALS RUN HOUR RUN AGE SINCE REFER- PERIOD ENCE PAGE THEN 1 YEAR 2 YEAR Change Engine oil Every100Hr 10-8 Replace Engine oil filter Every200Hr 10-8 Replace Hydraulic oil filter Every200Hr 10-10 Change Transmission fluid Every400Hr...
  • Page 85 MAINTENANCE RUN HOUR RUN AGE SINCE REFERENCE PERIOD PAGE THEN 1 YEAR 2 YEAR Check Every100Hr 10-15 Fuel line Replace Every2years 10-24 Toe-in Adjust Every200Hr 10-21 Engine valve clearance Adjust Every800Hr 10-22 Cooling system Flush Every2years 10-23 Coolant Change Every2years 10-23 Fuel system Bleed...
  • Page 86 LK30 / LK35 LUBRICANTS To prevent serious equipment damage, use only genuine KIOTI fluids, oils and greases, or equivalents. CAPACITIES (U.S.gal.) LOCATIONS LUBRICANTS LK30 LK35 No.2-D diesel fuel Fuel 28 (7.40) No.1-D diesel fuel if temperature is below -10 (14°F) °C...
  • Page 87 PERIODIC SERVICE HOW TO OPEN THE HOOD ........10-2 DAILY CHECK ............10-3 INITIAL 50 HOURS ............. 10-8 EVERY 50 HOURS............ 10-13 EVERY 100 HOURS..........10-14 EVERY 200 HOURS..........10-19 EVERY 400 HOURS..........10-21 EVERY 600 HOURS..........10-22 EVERY 800 HOURS..........10-22 EVERY 1 YEAR ............
  • Page 88 LK30 / LK35 LK30 / LK35 HOW TO OPEN THE HOOD HOOD SIDE COVER S41Oa01a S41Oa02a S41Oa03a (1) Knob (1) Side Cover (2) Hook (A) Push To open the tractor hood, turn the It is not necessary to remove the side...

  • Page 89: Periodic Service

    PERIODIC SERVICE PERIODIC SERVICE DAILY CHECK CHECKINg ENgINE OIL LEVEL For your own safety and maximum CAUTION service life of the machine, make a To avoid personal injury: thorough daily inspection before start- Be sure to stop the engine  ing and operating the machine.
  • Page 90 LK30 / LK35 LK30 / LK35 CHECKINg TRANSmISSION CHECKINg AND REFUELINg FLUID LEVEL 1. Turn the key switch to “ON”, check the amount of fuel by fuel gauge. 2. Fill fuel tank when fuel gauge shows 1/4 or less fuel in tank.
  • Page 91 PERIODIC SERVICE PERIODIC SERVICE Flash Point, Water and Sediment, Carbon Residue on, 10 percent Re- ash, ° C (° F) volume % siduum, % weight % 52 (125) 0.05 0.35 0.01 Distillation Temperatures, Viscosity Kinematic cSt or Viscosity Saybolt, sulfur, weight Copper Strip Cetane Num- °...
  • Page 92 LK30 / LK35 LK30 / LK35 CHECKINg COOLANT LEVEL CHECKINg BRAKE AND CLUTCH PEDALS 1. Check to see that the coolant level 1. The brake and clutch pedals should is between the “FULL” and “LOW” be inspected for free travel, and marks of recovery tank.
  • Page 93 PERIODIC SERVICE PERIODIC SERVICE CLEANINg gRILL, RADIATOR SCREEN CHECKINg gAUgES, mETER AND OIL COOLER SCREEN AND WARNINg LAmPS 1. Inspect the instrument panel for bro- IMPORTANT ken gauge(s), meter(s) and warning grill and screen must be clean  lamps. from debris to prevent engine 2.
  • Page 94 To avoid personal injury: To prevent serious damage to gine and drain the oil completely  Be sure to stop the engine the engine, use only a KIOTI  into the oil pan. before changing the oil. genuine filter. All the used oil can be drained out Allow engine to cool down ...
  • Page 95 PERIODIC SERVICE PERIODIC SERVICE ADjUSTINg BRAKE PEDAL 1. Release the parking brake CAUTION 2. Slightly depress the pedals and To avoid personal injury: measure the free travel at the top Be sure to stop the engine  of the pedal stroke. before changing oil filter car- 3.
  • Page 96 7. Make sure that the transmission flu- id doesn’t leak through the seal. IMPORTANT To prevent serious damage  to the hydraulic system, use only a genuine KIOTI filter. S41Oa13a S41Oa14a (1) Hydraulic Oil Filter (1) Oil Inlet Plug (2) Gauge (A) Oil level is acceptable within this range 4. Tighten the filter firmly until it con-...
  • Page 97 5. Check drain plugs for leaking transmission fluid. Run the engine at medium speed Model Oil capacity  for a few minutes to prevent LK30 26.0 (6.87 U.S gals.) damage to the transmission. 24 (6.34 U.S gals.) LK35 CAUTION To avoid personal injury: Allow engine to cool down suf- ...
  • Page 98 LK30 / LK35 LK30 / LK35 CHANgINg FRONT AxLE CASE 1. To drain the used oil, remove the right and left drain plugs and filling plug at the front axle case and drain the oil completely into the oil pan. 2. After draining, reinstall the drain plugs.
  • Page 99 PERIODIC SERVICE PERIODIC SERVICE EVERY 50 HOURS LUBRICATINg gREASE FITTINgS You should apply a small amount of multi-purpose grease to the following points every 50 hours or as needed. If your tractor is operated in extremely wet, muddy, or dusty conditions you should lubricate the fittings more often. S41Oa20a S41Oa19a S41Oa18a (1) Grease Fitting (Rear Bracket Axle Pivot) (1) Grease Fitting (Power steering cylinder)(RH,LH) (1) Grease Fitting (Brake Pedal) S41Oa21a...
  • Page 100 LK30 / LK35 LK30 / LK35 EVERY 100 HOURS C H E C K I N g W H E E L B O LT CHANgINg ENgINE OIL TORqUE See “Initial 50 hours” in page 10-8. ADjUSTINg BRAKE PEDAL See “Initial 50 hours” in page 10-9.
  • Page 101 PERIODIC SERVICE PERIODIC SERVICE CLEANINg FUEL FILTER CHECKINg FUEL LINE IMPORTANT If dust and dirt enters the fuel  system, the fuel pump and in- jection nozzles are subject to premature wear. To prevent this, be sure to clean the fuel filter bowl and element peri- odically.
  • Page 102 LK30 / LK35 LK30 / LK35 CLEANINg AIR CLEANER PRI- mARY ELEmENT 2) When carbon or oil adheres to the IMPORTANT element, soak the element in de- The air cleaner uses a dry el- tergent for 15 minutes then wash ...
  • Page 103 PERIODIC SERVICE PERIODIC SERVICE ADjUSTINg CLUTCH PEDAL BATTERY Mishandling or abuse of the battery can shorten the service life and adds to maintenance cost of the tractor. If the battery is weak it will cause the engine to be hard to start and also make lights dim.
  • Page 104 LK30 / LK35 LK30 / LK35 BATTERY CHARgINg DIRECTION FOR STORAgE 1. The water in the electrolyte evap- 1. When storing the tractor for a long CAUTION orates during recharging. Liquid period, remove the battery from To avoid personal injury: shortage damages the battery.
  • Page 105 PERIODIC SERVICE PERIODIC SERVICE EVERY 200 HOURS ADjUSTINg FAN BELT TENSION REPLACINg ENgINE OIL FILTER 1. Stop the engine and remove the See “Initial 50 hours” in page 10-8. key. 2. Apply moderate thumb pressure to belt between pulleys. 3. If tension is incorrect, loosen the al- ternator mounting bolts and, using a lever placed between the alternator REPLACINg HYDRAULIC OIL...
  • Page 106 LK30 / LK35 LK30 / LK35 CHECKINg RADIATOR HOSE CHECKINg POWER STEERINg AND CLAmP LINE PRECAUTION AT OVERHEATINg Take the following actions in the event the coolant temperature reaches the boiling point, what is called “Over- heating” 1. Stop the machine operation in a safe place and keep the engine un- loaded idling.
  • Page 107 PERIODIC SERVICE PERIODIC SERVICE EVERY 400 HOURS ADjUSTINg TOE-IN CHANgINg TRANSmISSION FLUID See “Initial 50 hours” in page 10-11. REPLACINg FUEL FILTER EL- EmENT (See “Cleaning fuel filter” in every 100 S41Oa31a S41Oa32a hours maintenance.) (A) Wheel - to - wheel distance at front (1) Lock Nuts (2) Tie Rod (B) Wheel - to - wheel distance at rear 1. Park tractor on a flat place.
  • Page 108 EVERY 1 YEAR ADjUSTINg FRONT AxLE PIVOT ADjUSTINg ENgINE VALVE REPLACINg AIR CLEANER CLEARANCE ELEmENT Consult your local KIOTI dealer for (See “Cleaning Air Cleaner Element” this service. in every 100 hours maintenance.) S41Oa33a (1) Lock Nut (2) Adjusting Screw...
  • Page 109 50%. 1. Stop the engine and let it cool. Securely tighten radiator cap. If  Coolant LK30 2. To drain the coolant, open the ra- the cap is loose or improperly 7.8 (2.06U.S.gals.) capacity...
  • Page 110 LK30 / LK35 LK30 / LK35 ANTI-FREEzE REPLACINg RADIATOR HOSE (WATER PIPES) If cooling water freezes, it can dam- * At 760 mmHg pressure (atmospher- Replace the hoses and clamps. age the engine and radiator. It is nec- ic). A higher boiling point is obtained (See “Checking Radiator Hose and...
  • Page 111 PERIODIC SERVICE PERIODIC SERVICE SERVICE AS REqUIRED BLEEDINg FUEL SYSTEm DRAININg CLUTCH HOUSINg REPLACINg FUSE WATER S41Oa36a S41Oa37a S41Oa38a (1) Fuel Cock (A) Close (1) Plug (1) Fuse Box (B) Open (C) Air Bleeding AIR mUST BE REmOVED: Your tractor is equipped with a plug Fuses protect the tractor electrical under the clutch housing.
  • Page 112 Failure to follow this pro- cedure may result in serious damage to the tractor electrical system. Refer to the trouble- shooting section of this manu- al or your local KIOTI dealer for specific information dealing with electrical problems. LK35-AU-10.indd 26 2010-01-20 오후 3:19:47...

  • Page 113: Storage

    STORAGE TRACTOR STORAGE ..........11-2 REMOVING THE TRACTOR FROM STORAGE ..11-3 LK35-AU-11.indd 1 2010-01-20 오후 3:24:58...
  • Page 114 LK30 / LK35 LK30 / LK35 TRACTOR STORAGE 1. Check the bolts and nuts for loose- CAUTION ness, and tighten if necessary. To avoid personal injury: 2. Apply grease to tractor areas where Do not clean the machine with ...
  • Page 115 STORAGE STORAGE REMOVING THE TRACTOR FROM STORAGE 10. Keep the tractor in a dry place 1. Check the tire air pressure and in- where the tractor is sheltered flate the tires if they are low. from rain. Cover the tractor. 2. Jack the tractor up and remove the 11.
  • Page 116 MEMO MEMO LK35-AU-11.indd 4 2010-01-20 오후 3:24:59...

  • Page 117: Troubleshooting

    TROUBLE SHOOTING ENGINE TROUBLE SHOOTING ........ 12-2 LK35-AU-12.indd 1 2010-01-20 오후 3:25:51...
  • Page 118 LK30 / LK35 LK30 / LK35 ENGINE TROUBLE SHOOTING If something is wrong with the engine, refer to the table below for the cause and its corrective measure. Trouble Cause Countermeasure No fuel flow. Check the fuel tank and the fuel filter. Replace Engine is difficult to start or won’t...
  • Page 119 Adjust or replace fan belt.   Dirty radiator core or grille screens Remove all trash.   Coolant flow route corroded Flush cooling system.   If you have any questions, contact your local KIOTI dealer. LK35-AU-12.indd 3 2010-01-20 오후 3:25:51...
  • Page 120 MEMO MEMO LK35-AU-12.indd 4 2010-01-20 오후 3:25:52...

  • Page 121: Options

    OPTIONS OPTIONS..............13-2 LK35-AU-13.indd 1 2010-01-20 오후 3:26:39...
  • Page 122 LK30 / LK35 OPTIONS Consult your local KIOTI dealer for further detail. Rear hydraulic valve  Front end weights  For front ballast Rear Wheel Weights  For rear ballast LK35-AU-13.indd 2 2010-01-20 오후 3:26:40...

  • Page 123: Index

    INDEX INDEX................14-2 LK35-AU-14.indd 1 2010-01-20 오후 3:27:26...
  • Page 124 LK30 / LK35 LK30 / LK35 NUMBERIC 3-POINT HITCH ..............6-3 CHANgINg ENgINE OIL ............ 10-8 3-POINT HITCH CONTROL SYSTEM ........7-2 CHANgINg ENgINE OIL ..........10-14 3-POINT HITCH LOwERINg SPEEd ........7-3 CHANgINg FRONT AxLE CASE OIL ......10-12 CHANgINg FRONT AxLE CASE OIL ......
  • Page 125 INDEX INDEX CLEANINg FuEL FILTER ..........10-15 EVERY 50 HOuRS............10-13 CLEANINg gRILL, RAdIATOR SCREEN ANd OIL EVERY 600 HOuRS............10-22 COOLER SCREEN ............10-7 EVERY 800 HOuRS............10-22 COOLANT TEMPERATuRE gAugE ........5-20 ExTERIOR VIEw ..............4-2 COuPLER CONNECTINg ANd dISCONNECTINg .... 7-5 FLuSH COOLINg SYSTEM ANd CHANgINg COOLANT ..
  • Page 126 LK30 / LK35 LK30 / LK35 OPERATINg THE TRACTOR ..........1-5 OPERATION ................6-3 IMMEdIATELY STOP THE ENgINE IF ....... 5-18 OPTIONS ................13-2 IMPLEMENT LIMITATIONS ........... 3-6 IMPLEMENT LOwERINg LIMIT ........... 7-3 INFLATION PRESSuRE ............8-2 PTO OPERATION..............5-25 INITIAL 50 HOuRS .............
  • Page 127 INDEX INDEX REPLACINg HYdRAuLIC OIL FILTER ......10-10 TOP LINk ................6-3 REPLACINg HYdRAuLIC OIL FILTER & TRANSMISSION TRACTOR SAFETY LABELS ..........1-14 OIL FILTER ..............10-19 TRACTOR STORAgE ............11-2 REPLACINg LIgHT BuLB ..........10-26 TRAVELINg SPEEd ............. 3-5 REPLACINg POwER STEERINg HOSE ......
  • Page 128 LK35-AU-14.indd 6 2010-01-20 오후 3:27:27...

This manual is also suitable for:

Lk35

Table of Contents

Save PDF