Changing Front Axle Case Oil(N); Changing Front Axle Case Oil(N) - Kioti PX1002 Owner's Manual

(1) air Bleeding plug
IMPORTANT
•
When adding the fluid, un-
screw the bleeding plug on
the top of the hydraulic cylin-
der. Other-wise, the fluid can
overflow.
TG110-AU-07.indd 17

ChANGING fRONT AxlE CAsE OIl(N)

a40o706a
(1) Oil Filler Plug (2) checking oil pulg
(3) Drain Plug
1. To drain the used oil, remove the
right and left drain plugs and fill-
ing plug at the front axle case and
drain the oil completely into the oil
pan.
2. after draining, reinstall the drain
plugs.
3. remove the oil level checking plug
on the left of the front axle.
4. Add new oil to the specified level
through the oil filler.
5. wait at least 15 minutes to allow
the oil flow to the bevel case be-
fore checking the oil level.
6. add oil as necessary and tighten
the oil filler plugs and oil level
checking plug.
Front Axle Oil Capacity
Tg1o744a
8.9 l (2.4 u.s.gal.)
7
17
-
MainTenance
7
2013-03-15 오후 5:11:17