Installing Pto Shaft; Installing Pto Shaft - Kioti CS2510H Operation Instructions Manual

WARNINg
Never use any other part for

pulling except draw bar. Pull-
ing with top link, ROPs and
etc. will cause a fatal accident.
Be sure to install the auxiliary

safety chain when installing a
trailer.
Improper use of the draw-bar,

even if correctly positioned,
can cause a rear overturn.
Do not overload an attachment

or towed equipment. Use prop-
er counterweights to maintain
tractor stability. Hitch heavy
loads to the draw-bar only.
Make sure that there is nobody

or not obstacle between trac-
tor and trailer.
CS2510,2610-유럽,호주향-06.indd 9

INsTALLINg PTO sHAfT

(1) PTO Shaft
1. consult your local KIOTI dealer
for selection of the PTO Shaft.
2. When selecting a PTO Shaft,
make sure that it is not too short to
come off of the female and male
shafts at the highest position or too
long to impact its female and male
shafts at the lowest position.
3. Move the joint back and forth to
check that its lock pin is properly
seated to the groove of the PTO
shaft.
3-POINT HITcH IMPLEMENT OPERATION
H11O682A
(1) Lock Pin
6
- 
1 1
C56O140A
6
T66O122A
2020-04-03 오전 9:43:13