Kioti CS2510H Operation Instructions Manual page 61

ACC (b)

when the key switch is turned to
the position "B", flasher lights, horn
and power socket can be oper-
ated.
(C)

The position "C" indicates the "ON"
position. As soon as the key switch
is turned to this position, the oil
pressure warning lamp and battery
charge warning lamp comes on.
(These turn off after the engine is
started)
CS2510,2610-유럽,호주향-04.indd 5
CAuTION
Caution before starting Engine.
1. u n d e r n o r m a l c o n d i t i o n ,
warning lamp turns on about
one second at the time of
Key-On, and then turns off
automatically.
2. In case of warning lamp flash-
ing, confirm flashing pattern.
Refer to the warning indica-
tions at the time of error de-
tection.
3. Ensure to Key-Off at the time
of error rectify procedure.
4. Key-On again to confirm the
recovery after correcting error.
Do not operate Engine except in
case of emergency.
desCrIpTION OF OperATING sysTeM
NOTE
The pre-heating operation will

automatically be activated in this
position "C" (ON). The automatic
preheat operation is indicated
by the glow plug indicator. Make
sure to preheat the engine un-
til the glow plug indicator goes
off (approx. 6 seconds) in cold
weather before turning key switch
to start position.
CS2210

Temp. pre-heating and indicating time
T 40 0 sec
＞
-15 ＜ T ＜ 40 6 sec
T ＜ -15 10 sec
CS2510

Temp. pre-heating and indicating time
T 30 0 sec
＞
-15 T 30 8 sec
＜ ＜
T -15 15 sec
＜
4
- 
4
2020-04-03 오전 9:41:31