Changing Front Axle Case Oil(N) - Kioti Daedong EX35 Manual

CHANGING FRONT AXLE CASE OIL(N)

(1) Oil Filler Plug (2) Drain Plug
1. To drain the used oil, remove the right
and left drain plugs and filling plug at
the front axle case and drain the oil
completely into the oil pan.
2. After draining reinstall the drain plugs.
3. Remove the oil level check plug on
the left of the front axle.
H11O618A
MAINTENANCE
(1) Oil Filler Plug
4. Add new oil to the specified level of
the check plug through the oil filler.
(Refer to "Lubrication" in the chapter
"Service".)
5. Tighten the oil filler plug after
replenishment.
6. Check the oil level in 15 minutes and
add oil as necessary.
Oil capacity 7.5 (1.9 U.S.gal.)
7
-17
H11O619A
7