INITIAl.OPERATION
Driving a new tractor at a high speed
or load can damage its overall dura-
bility.
make sure to run the tractor at the
proper work load and speed for the
initial operation of 10 to 20 hours.
SAfETy.lOCk.fUNCTION.(WHIlE.
vEHIClE.IS.STATIONARy)
1) The engine can be started only
under the following conditions due
to its safety lock function:
. The.operator is on the seat.
. The range shift lever is in the
neutral position.
. The pTo clutch is disengaged.
2) The tractor cannot be driven with
the forward and reverse driving
pedals depressed simultaneously
while the engine is running.
In order to drive the tractor, first re-
lease the pedals. Then, the safety
lock will be deactivated in approx. 0.5
seconds and the tractor is ready to
drive.
CS2510,2610-유럽,호주향-05.indd 3
TIPS.fOR.bREAkING-IN
1. Break in the vehicle within initial 50
hours of operation.
2. Start the engine and idle the en-
gine at a low speed for 3 to 4 min-
utes in advance.
3. Increase the idling time in cold
weather.
4. Do not drive the tractor at the max-
imum speed on a road.
5. Never apply excessive load during
work.
6. Idle the engine at a low speed for
2 to 3 minutes before stopping it.
opERATIoN
OPERATING.THE.ENGINE
STARTING.THE.ENGINE
WARNING
To.avoid.accidents:
be.sure.to.read.and.understand.
the. warning. and. caution. de-
cals.on.the.tractor.thoroughly.
Run.the.engine.only.in.a.well-
ventilated.area,.or.you.can.be.
suffocated.by.exhaust.fumes.
Never. start. the. engine. unless.
you.are.on.the.driver's.seat..
. The. tractor. can. abruptly. start.
off,.resulting.in.an.injury.or.ac-
cident.
ImPORTANT
. Using. an. additive. so. the. en-
gine.will.start.more.easily.can.
damage.the.engine..And.it.will.
not.be.covered.by.warranty..
. Never. try. to. start. the. engine.
for. over. 10. seconds. consecu-
tively. to. protect. the. start. mo-
tor.and.battery.from.damage.
5
-
5
2020-04-03 오전 9:42:32