Lifting Arm (Lower Link) Speed Control Lever; Double Acting Lever (Optional); Double Acting Lever (Optional) - Kioti CS2510H Operation Instructions Manual

4
2
- Cs2510h/Cs2610h
lIFTING ARM (lOwER lINK)
SPEED CONTROl lEvER
(1) Lowering speed control lever
(A) high speed (b) Low speed
Turning the lever counterclockwise
increases the lowering speed while
turning it clockwise decreases the
lowering speed. Also, turning it clock-
wise to its end can fix the implement
to a certain position.
NOTE
This lever does not control the

lifting speed of the lifting arm.
CS2510,2610-유럽,호주향-04.indd 26

DOublE ACTING lEvER (OPTIONAl)

M46O439A
(1) double Acting Lever
(A) port A
This lever is used to control a auxiliary
hydraulic implement installed on rear.
Lowering the lever supplies hydraulic
fluid to port b, while raising it sup-
plies hydraulic fluid to Port A.
pushing the lever supplies the port A
with hydraulic pressure while pulling
it supplies the port b with hydraulic
pressure.
For detailed information, see "Opera-
tion" in Chapter 5.
M46O440A
(1) Quick Coupler
(b) port b
Put the detent valve operating

lever into the neutral position
when the hydraulic implement
is not in use. If the detent
valve is kept in the operating
position for an extended pe-
riod of time, the relief valve is
kept open and the temperature
of the hydraulic fluid rises,
leading to damage of various
hydraulic parts, such as the oil
seals and O-rings.
M46O448A
WARNING
2020-04-03 오전 9:41:56