Declaration Of Conformity For Machinery Atex - ProMinent S1Ba 12017 PVT Operating Instructions Manual

Declaration of Conformity for Machinery ATEX

24 Declaration of Conformity for Machinery ATEX
For pumps with explosion protection:
Tab. 23: Excerpt from the Declaration of Conformity
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied, in
particular:
Ex specification of the entire
system:
Date:
90
We hereby declare
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified in the following, complies with
the relevant basic health and safety requirements of the Directive, on the
basis of its functional concept and design and in the version distributed by
us.
Any modification to the product not approved by us invalidates this decla‐
ration.
Metering pump, Sigma product range
Design for use in areas at risk of explosion in accordance with the ATEX Direc‐
tive (2014/34/EC)
S1Ba_ _ _ _ _ _ _ _ _ _ _ _ _ _ § $ _ _
with characteristics
§ = "L" or "P" and $ = "1" or "2"
see nameplate on the unit
ATEX Directive (2014/34/EC)
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive 2006/42/EC
EMC Directive (2014/30/EU)
EN ISO 80079-36:2016, EN ISO 80079-37:2016,
EN ISO 12100:2010, EN 809:1998 + A1:2009 + AC:2010
EN 61000-6-2:2005 + AC:2005, EN 61000-6-4:2007 + A1:2011
II 2G Ex h IIC T3 Gb X for $ = "1"
II 2G Ex h IIC T4 Gb X for $ = "2"
X*: max. media temperature 90 °C
Ambient temperature -10 °C ... +40 °C
16.11.2018
* With regard to "Special conditions" - refer also to the "Safety chapter" -
"Safety information for ATEX designs" - "Special conditions for ATEX".
You can download the Declaration of Conformity at www.prominent.com.
The Declarations of Conformity, the EC type-examination certificates and
the operating instructions for the individual components are also enclosed
with the pump.