Assembly
6.4 Fastening
Liquid end alignment
m
m
Fig. 14: Dimensions (m)
30
Dosing rate too low.
The valves of the liquid end cannot close correctly if the valves of the
liquid end are not upright.
Ensure that the discharge valve is upright.
n
Vibrations can disturb the liquid end valves.
Secure the metering pump so that no vibrations can occur.
n
Take the dimensions (m) for the fastening holes from the appropriate
dimensional or data sheets.
DN
Use appropriate screws to fix the pump base to the foundation.
P_MOZ_0015_SW