Decommissioning - ProMinent S1Ba 12017 PVT Operating Instructions Manual

Diaphragm motor-driven metering pump
Table of Contents

Advertisement

Decommissioning

14
Decommissioning
Before commencing all work
Decommissioning
56
WARNING!
Danger from hazardous substances!
Possible consequence: Fatal or very serious injuries.
Please ensure when handling hazardous substances
that you have read the latest safety data sheets provided
by the manufacture of the hazardous substance. The
actions required are described in the safety data sheet.
Check the safety data sheet regularly and replace, if
necessary, as the hazard potential of a substance can
be re-evaluated at any time based on new findings.
The system operator is responsible for ensuring that
these safety data sheets are available and that they are
kept up to date, as well as for producing an associated
hazard assessment for the workstations affected.
1.
Disconnect the pump from the power supply.
2.
Depressurise the pump.
3.
Use a suitable flushing medium to flush the pump, referring to the
material safety data sheet for the feed chemical.
WARNING!
Danger from hazardous substances!
Possible consequence: Fatal or very serious injuries.
Please ensure when handling hazardous substances
that you have read the latest safety data sheets provided
by the manufacture of the hazardous substance. The
actions required are described in the safety data sheet.
Check the safety data sheet regularly and replace, if
necessary, as the hazard potential of a substance can
be re-evaluated at any time based on new findings.
The system operator is responsible for ensuring that
these safety data sheets are available and that they are
kept up to date, as well as for producing an associated
hazard assessment for the workstations affected.
There is normally chemical residue in the liquid end and on the housing
after operation. This chemical residue could be hazardous to people.
It is mandatory that the safety information in the "Storage, transport
n
and unpacking" chapter is read before shipping or transporting the
unit.
Thoroughly clean the liquid end and the housing of chemicals and dirt.
n
Pay attention to the material safety data sheet for the feed chemical.
WARNING!
Warning of eye injuries
When opening the relief valve, a spring under high ten‐
sion can jump out.
Wear protective glasses.
The unit may be damaged by incorrect and improper storage and trans‐
port.
Take into account the information in the "Storage, transport and
n
unpacking" chapter if the system is decommissioned for a temporary
period.

Advertisement

Table of Contents
loading

Table of Contents