Strong SRT 7015 Manual page 27

Parental Lock
Menu Lock
Channel Lock
New Password
Confirm Password
OSD Setting
OSD Timeout
OSD Transparency
Favourite
Here you can rename the default names of the Favourite lists. For example: Movies or Music. Or even the
names of users of the unit with their own dedicated channels. Select the list name you want to edit and
press OK. Use the pop-up keyboard to change the name and select BLUE (OK) to confirm.
Audio Description setting
AD. For the visually impaired, a narrator can describe the actions happening on screen with a dedicated
additional audio track, mixed with the original audio track. This service is provided by some broadcasters
and is therefore subject to availability.
AD Service
Use AD as default
AD Volume Offset
Auto Standby
Tools
This menu provides some technical options for the working of the unit.
Information
Factory Setting
Reset your receiver to the default factory settings.
Enter your password or the default password 0000, select Yes and press OK to confirm.
The receiver will reboot and start with the First Installation menu.
Set the age limit for a viewer if the viewer is underage. These only functions if a
broadcaster sends an age-signalling for the current programme. You can only
enter the Parental Lock menu by entering your password. The default password
0000
Select either On or Off. When On many menu items can only be accessed after
entering the password.
Set to Off, channels selected as Lock in the Edit Channel menu, are all accessible
without entering the password. When selected On, these channels are blocked
and need the password to be entered.
To change the default password from 0000 to another password like you wish,
select this option. Enter the new password.
Re-enter your new password to confirm.
Make a note off the new password.
OSD means On Screen Display, all the graphics you will see on screen.
Set the time (in seconds) the program banner will be shown on screen, when
switching channels.
Set the amount of transparency the OSD (banners and menu) will have,
superimposed on the running program. 40% is the most transparent option.
Select On if you wish to use the service by default on all channels which may
carry an AD track.
Select On if you wish to use the service by default on all channels which may
carry an AD track.
Set the balance of volume the AD audio track will have, mixed with the original
audio track.
This feature is implemented for power saving. The receiver will turn to Standby
automatically if no command from the remote is received for the selected time
period. Default is 3 hours. It can also be turned Off.NOTE: If there are timers
running, the auto standby function will be disabled for the booked time.
Read the technical details of your receiver, like model number, Software/
Hardware version and serial number. This information could be asked during a
service call or repair request.
27