Table of Contents
Advertisement
4:3 Letterbox 4:3LB (Letterbox)
For 4:3 TV screens. The unit will display all content in its original aspect ratio. Programmes formatted in 16:9
will be presented with black bars on the top and bottom.
4:3 Pan&Scan 4:3PS (Pan&Scan)
For 4:3 TV screens.16:9 content will have the extreme left and right portions cut off and presented full
screen.
Digital Audio Output
Using PCM mode is the best option if you do not have a TV or Digital Amplifier that are not able to process
Multi audio.
7.3.5 Local Time Setting
Press MENU and select Local Time Setting The menu provides options to adjust the time and date settings.
Press pq to select an option and t u to adjust the setting. Press
Region
UTC Usage
UTC Offset :
Summer Time
Date:
Time:
7.3.5.1 Timer Setting
In this menu you can setup the schedule for automatic switching to the defined channels at a particular
date/time.
Timers can be set directly from the EPG window or manually from this screen. Not set timers will be default
Off
To enter a new timer manually, select an Off marked timer in the list and press OK.
Timer Mode
Timer Service
Wakeup Channel
Wakeup Date
On Time
Duration
After all settings have been made, select Save to store the settings. Select Cancel to discard the settings.
To edit an already existing timer entry, select the entry in the list and press OK, then select and edit the item
which you wish to change.
To delete an already existing timer entry, select the entry in the list and press OK, then select and set Timer
Mode to Off and select Save to store.
Exit the screens with .
Select digital audio output mode. Settings affect both S/PDIF and HDMI
outputs.
PCM – audio from any format will be converted to PCM Stereo format
RAW – audio from receiver will be send out in the original format
Select the region or country in which you live. This will set the time offset from
UTC automatically.
Select By Region (the Region selection is valid), User Define (You may select your
UTC Offset yourself ) or Off (Time and Date setting are free to adapt.) However,
the default By Region setting and the correct Region setting are usually
sufficient. In case the Daylight Saving Time should not be delivered by the
broadcaster, you can adapt it here.
Select the correct Time Zone in which you live.
You may adapt On or Off for Daylight Saving Time, should it not be delivered by
the broadcaster.
Enter the date when UTC Usage is set to Off.
Enter the time when UTC Usage is set to {Off.
Select Once for a onetime event, select Daily for each day, same time event. A
free timer is default Off.
Select Channel to wake up the receiver to view the channel.
Select the channel for this event. Use t u or OK for a pull down list to select.
Select the date for the event.
Enter the time to start the event.
Enter the length of the event.
to exit the menu.
26
Advertisement
Table of Contents
