Time Setting - Strong SRT 7806 User Manual

NOTE:
The correct functionality highly depends on the information from the operator. It is
recommended to set this parameter to the age of the youngest child who has access
to television with this receiver. Whenever zapping through channels which submit
EPG based on parental rate system and if the rate of current broadcasts is higher
than the adjusted rate, it requires the PIN code for viewing.
Smartcard PIN code change:
To change the PIN code of your smartcard. This function is only available while the
smartcard is inserted.
STB PIN code change:
To change the PIN code of your receiver.
NOTE:
To change the PIN code, you have to know the previous PIN code. Then you can
enter and confirm the new PIN code.
WARNING:
You only have 3 (!) attempts to enter the correct active PIN code. If you exceed this
quantity, you have to contact your operator for help.

7.2.4 Time Setting

This submenu provides options to adjust the time and date settings.
GMT Offset: Select the offset from GMT standard time. Set to Auto to adjust it automatically.
Summer Time: Enable/disable the summer daylight saving time offset. Select On or Off depending on
the season. The parameter can only be changed if GMT Offset is not set to Auto.
Date: Set the current date.
Set the current time.
Time:
Standby time display:
Show the current time on the STB's LED display in Standby mode.
Auto Standby After:
Define the period of time of the receiver automatically switching to Standby mode if
no commands have been received from the remote control. Available options: Disable,
1 Hour, 2 Hours, 3 Hours (default value),..., 12 Hours.
7.2.5 Timer
This submenu allows you to automatically switch to the defined channels at a particular date and
time and to turn the receiver ON and OFF based on scheduled events. Timers can be set via the EPG
(recommended and most convenient). Please refer to section 6.8 above for more details.
However, you can set timers manually in this submenu. In the submenu Timer a summary of all timers
will be displayed: Number, Channel Name, Date, Starting time, Duration and Timer status.
Use p q to select a timer, press Ok to book a new timer or to edit an existing one.
Timer Status: If no timer was booked yet, this parameter is set to Off
Option Once means that the timer will be executed once, after it will be removed from
the timer list.
Option Monday-Friday – the timer will run each working day of the week at a specified
time (Start Time field).
Option Daily – the timer will run every day at a specified time (Start Time field).
Option Weekly – the timer will run every week at a specified week day (Day field) and at
a specified time (Time field).
16