Table of Contents
Advertisement
PART 1 • English
7.3.2 Tv System
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution:
Aspect Mode:
Connection:
RF System:
RF Channel:
Digital Audio Output:
7.3.3 local Time Setting
Here you can set up your region and time zone.
Region:
GMT Usage:
GMT Offset:
Summer Time:
Date:
Time:
7.3.4 Timer Setting
This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use pq to select Timer Setting from the System Setup menu and press ok to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you
wish to set or change with pq and press ok to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode:
Timer Service:
Wakeup Channel:
Toggles between 576i up to 1080p. Please use a setting that matches your
TV's specifications. After a selection is made, you will be asked to confirm.
Note: Selection is only applicable on HDMI.
Use this option to select the aspect ratio of your TV and the preferred
conversion method. Options are: Auto (automatic detection of aspect ratio),
4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),
4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and 16:9
(use this setting for 16:9 TV sets).
Use this option to select the connection to your TV set. Select HDMI or TV
SCART.
When using the built-in RF modulator, you can select here your TV set's
analogue reception system. Default is PAL-BG.
Set the RF channel of the modulator. Default is channel 38.
Toggles between PCM and Bitstream output. When PCM is selected, all audio
will be converted to stereo audio. Bitstream enables multi-channel audio on
the digital output.
Use tu to select the region you live in.
Set to On for broadcaster defined time or to Off to input time and
date manually.
Allows you to adjust the time zone you live in. This option is only available
when GMT Usage is set to On. The GMT Offset range is "-11:30 ~ +12:00",
increasing by half hours progressively. The cities matching the set GMT Offset
are displayed at the bottom of the screen.
Select Off or On to add one hour extra for summer time during the summer.
Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the date. Press EXIT to proceed.
Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the time. Press EXIT to proceed.
Choose between Off (Timer inactive), Once or Daily (Timer will be executed
every day).
Choose between Channel (Timer will wake up the receiver) or Record (Timer
will start to record the scheduled event).
Use tu to select the channel the timer will wake up with.
13
Advertisement
Table of Contents
