Time Setting - Strong SRT 8110 User Manual

Auto Search
Search and install all channels automatically. This option overwrites all previously installed channels.
1. Select Auto Search and press oK or u to start channel search.
2. To cancel channel search, press EXIT.
Manual Search
Install new channels manually. This option adds new channels without changing the current channels list.
1. Select Manual Search then press oK or u. The channel search screen will appear.
2. Press the tu to select the channel number or enter the channel number using [0..9] buttons.
3. Press oK to start searching channels
A found channel will be saved and added to the channels list. If channels can't be found, then exit the menu.
Tip: Signal quality and level indicators will show presence of the signal on selected channel frequency.
Country
Select your country of residence. It is important to set the correct country as some tuning parameters depend on the country.
Antenna power
Enable Antenna Power if an external active antenna is connected.

5.4 Time Setting

Press MEnU select Time. The menu provides options to adjust the time settings and allows you to setup scheduled
recordings of programmes.
Press pq to select an option and press tu to adjust the setting. Press EXIT to exit the menu.
5.4.1 Schedule
In this menu you can setup the schedule for automatic recording or switching to the defined channels at a particular
date/time.
Add Press RED button to add a new booking. In the appearing dialog select the desired channel type and number,
the starting date and time, end time, repeat cycle (once, daily or weekly) and mode (view or record).
Once you set all parameters, press oK to store your booking.
Edit
Press gREEn button to edit an existing booking.
Delete Press blUE button to delete a booking from the list.
Tip: If you have scheduled recordings, make sure to have an external storage device connected to the receiver.
Check periodically, if free space is available on the storage device for future recordings.
Time offset
Select auto or manual for GMT offset adjustments.
Country Region
Select the Country Region when Time Offset is set to Auto.
Time Zone
Select the Time Zone Offset when Time Offset is set to Manual.
Sleep
This function will switch the receiver to standby when it doesn't receive any commands for a given period of time .
When this option is set to OFF, the function is disabled. Please set the time after which the receiver should go to stand
by or select OFF to disable this function.
5.5 option
Press MEnU and select Option. In this menu you can to adjust the OSD Language, Subtitle Language, Audio Language
and Digital Audio mode.
Select an option and press tu to adjust the setting. Press EXIT to exit the menu.
8
PART 1 • English