Local Time Setting; Timer Setting; Parental Lock - Strong PRIMA V User Manual

PART 1 • English
Digital Audio Output:

7.3.3 local Time setting

Here you can set up your region and time zone.
Region:
GMT Usage:
GMT Offset:
Summer Time:
Date:
Time:
Time Display

7.3.4 Timer setting

This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use pq to select Timer Setting from the System Setup menu and press ok to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you
wish to set or change with pq and press ok to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode:
Timer Service:
Wakeup Channel:
Wakeup Date:
Wakeup Time:
Duration:
When all settings are according to your wishes, use pq to move the highlight to Save and press ok
to confirm. To quit the timer without saving your settings, move the highlight to Cancel.

7.3.5 Parental lock

This menu allows you to protect the installation menu and/or channels with a password. You can also
enter a new password in the Parental Lock menu.
Use pq to select Parental Lock from the System Setup menu and press ok to proceed. You will be
asked to enter your pin code. (DEfAUlT: 0000)
Menu Lock:
Toggles between PCM and Bitstream output. When PCM is selected, all digital
audio will be converted to stereo audio. Bitstream enables multi-channel
audio on HDMI for use with a Home Cinema Set.
Use tu to select the region you live in.
Set to On for broadcaster defined time or to Off to input time and
date manually.
Allows you to adjust the time zone you live in. This option is only available
when GMT Usage is set to On. The GMT Offset range is "-11:30 ~ +12:00",
increasing by half hours progressively. The cities matching the set GMT Offset
are displayed at the bottom of the screen.
Select Off or On to add one hour extra for summer time during the summer.
Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the date. Press EXIT to proceed.
Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the time. Press EXIT to proceed.
Select On to display time on screen, Off to remove.
Choose between Off (Timer inactive), Once, Daily (Timer will be executed
every day, same time) or Weekly (timer will be executed every week, same day,
same time)
Choose between Channel (Timer will wake up the receiver) or Record (Timer
will start to record the scheduled event).
Use tu to select the channel the timer will wake up with.
Use the 0~9 buttons to input the date for the timed event.
Use the 0~9 buttons to input the start time.
Use the 0~9 buttons to input the timer duration.
Locks the installation menu. You can set Menu Lock to On or Off.
13