Local Time Setting; Timer Setting; Parental Lock - Strong SRT 3000 Installation Instructions Manual

Digital Plus* audio to the TV via HDMI or to a Home entertainment system (for example)
through coaxial S/PDIF.
noTe:
Dolby® Digital Plus* is only available on the HDMI output.
*Dolby® and the double-D symbol are registered trademarks of Dolby® Laboratories

7.3.3 Local Time setting

Here you can set up your region and time zone.
Use tu to select the region you live in.
Region:
GMT Usage: Set to By Region for broadcaster defined time, User Define to select manual a GMT zone or to Off
to input time and date manually.
GMT Offset: Allows you to adjust your time zone. This option is only available when GMT Usage is set to User
Define.The GMT Offset range is "-11:30 ~ +12:00", increasing by half hours progressively. The
cities matching the set GMT Offset are displayed at the bottom of the screen.
Select On to add one hour for summer time.
Daylight Saving:
Date and Time settings are available only when GMT Usage is set to Off. Use the 0~9 buttons to
Date:
enter the date. Press eXiT to proceed.
Date and Time settings are available only when GMT Usage is set to Off. Use the 0~9 buttons to
Time:
enter the time. Press eXiT to proceed.
Time Display Select On to display time on screen, Off to remove.

7.3.4 Timer setting

This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use pq to select Timer Setting from the System Setup menu and press ok to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you wish to set or
change with pq and press ok to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode: Choose between Off the timer is inactive, Once, Daily (the timer will be executed every day,
same time) or Weekly (the timer will be executed every week, same day, same time) and
Monthly (the timer will be executed every month, same day, same time).
Timer Service: Choose between Channel (the timer will wake up the receiver) or Record (Timer will start
recording the scheduled event).
Use tu to select the channel the timer will wake up with.
Wakeup Channel:
Use the 0~9 buttons to enter the date for the timed event.
Wakeup Date:
Use the 0~9 buttons to enter the starting time.
Wakeup Time:
Use the 0~9 buttons to enter the duration of the timer.
Duration:
When all settings have been made, use pq to move the highlight to Save and press ok to confirm. To quit the timer
without saving your settings, move the highlight to Cancel.

7.3.5 Parental Lock

This menu allows you to protect the installation menu and/or channels with a PIN code. You can also enter a new PIN
code in the Parental Lock menu.
Use pq to select Parental Lock from the System Setup menu and press ok to proceed. You will be asked to enter your
PIN code. (DefAuLT Pin: 1234)
Locks the installation menu. You can set Menu Lock to On or Off.
Menu Lock:
Parental Rating: Choose between: Off, 4 years and up to 18 years. Channels with a parental rating above the
chosen age will be protected with a PIN code (if available in your local broadcast.)
New Password: Enter your new PIN code (4 digits) here.
Confirm Password: Re-enter your PIN code here to confirm.
13