Duress Code - AJAX KeyPad S Plus Jeweler Manual

Duress code

KeyPad S Plus supports duress code. It allows you to simulate alarm
deactivation. In this case, the
not give away your actions. Still, the security company and other security
system users will be alerted about the incident.
Learn more
Unauthorized access auto-lock
If a wrong code is entered three times within 1 minute, the keypad will be locked
for the time speci ed in its
codes while simultaneously informing the users of the security system about an
attempt to guess the code.
A user or PRO with administrator rights can unlock the keypad through the app.
Also, unlocking occurs automatically after the lock time speci ed in the settings
expires.
Mute interconnected re detectors alarms function
KeyPad S Plus can mute an interconnected re alarm by pressing the Function
button (if the required setting is enabled). The reaction of the system to pressing
a button depends on the settings and the state of the system:
Interconnected Fire Detectors Alarms have already propagated — by the
rst press of the button, all sirens of the re detectors are muted, except for
those that registered the alarm. Pressing the button again mutes the
remaining detectors.
Interconnected alarms delay time lasts — by pressing the Function button,
the siren of the triggered Ajax re detectors is muted.
Remember that the option is available only if Interconnected Fire Detectors
Alarm is enabled.
Learn more
Ajax app and the
settings . During this time, the hub will ignore all
sirens installed at the facility will