AJAX KeyPad S Plus Jeweler Manual page 14

1. Go to the Devices
2. Select KeyPad S Plus from the list.
3. Go to Settings by clicking on the gear icon
4. Set the required parameters.
5. Click Back to save the new settings.
Parameter
Name
Room
Group Management
Access Settings
tab.
Name of the device. Displayed in the list of hub
devices, text of SMS and noti cations in the
events feed.
To change the name of the module, click on the
text eld.
The name can contain up to 12 Cyrillic
characters or up to 24 Latin characters.
Selecting the virtual room to which KeyPad S
Plus is assigned. The name of the room is
displayed in the text of SMS and noti cations in
the event feed.
Selecting the security group controlled by the
device. You can select all groups or just one.
The eld is displayed when the
is enabled.
Selecting the method of arming/disarming:
.
Value
Keypad codes only.
User codes only.
Keypad and user codes.
To activate the Keypad Access
Codes set up for people who are
not registered in the system,
select the options on the keypad:
Group mode