AJAX KeyPad S Plus Jeweler Manual page 17

Jeweller Signal Strength Test
Signal Attenuation Test
Pass/Tag Reset
Permanent Deactivation
When the option is enabled, the sirens
connected to the security system give an alert
when the * button (Function button) is pressed.
Switches the keypad to the Jeweller signal
strength test mode. The recommended value is
2–3 bars.
Learn more
Switches the keypad to the signal attenuation
test mode.
Learn more
Allows deleting all hubs associated with Tag or
Pass from device memory.
Learn more
Allows the user to disable the device without
removing it from the system.
Three options are available:
No — the device operates normally and
transmits all events.
Entirely — the device will not execute
system commands or participate in
automation scenarios, and the system will
ignore device alarms and other noti cations.
Lid only — the system will only ignore
noti cations about the triggering of the
device tamper button.
Learn more
The system can also automatically deactivate
devices when the preset number of alarms is
exceeded or when the recovery timer expires.
Learn more