Access Codes; Duress Code - AJAX KeyPad Fibra User Manual

and turns off the display.
As the keypad goes into power saving mode, it resets the commands entered.

Access codes

KeyPad Fibra supports from 4 to 6 digit codes. Entering the code should be
con rmed by pressing one of the buttons:
mode). Any characters typed accidentally are reset with a button
KeyPad Fibra supports code types as follows:
Keypad code — common access code. Set in the settings of each keypad.
When used, all events are delivered to Ajax apps on behalf of the keypad.
User code — the personal code of the user who has an Ajax account and is
linked to the hub. Each system user sets the code independently in the hub
settings. When used, all events are delivered to Ajax apps on behalf of the
user. The code works for all keypads that are connected to this hub.
Unregistered user code — the code of the user who does not have an Ajax
account. The code is set by an administrator or PRO with system setup
rights in the hub settings. When used, events are delivered to Ajax apps with
a name associated with this code. The code works for all keypads that are
connected to this hub.
The number of codes supported depends on the hub model.
KeyPad Fibra also supports arming without entering a code, if the Arming
without Code function is enabled in the
disabled by default.

Duress code

(Arm), (Disarm) and
keypad settings . This function is
(Night
("Reset").